Rugged Ridge A-Pillar Light Kit Semi-Gloss Black With Two 3" Square LED Lights Jeep Wrangler JK 2007-2018

Rugged Ridge:
MSRP $162.00
You save 10%

Rugged Ridge Semi-Gloss Black A-Pillar Light Kit with Two 3" Square LED Lights for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

Improve your ability to see when you hit the off-road trails at night with this Semi-Gloss Black A-Pillar Light Kit with Two 3" Square LED Lights from Rugged Ridge. This kit is designed specifically for your 2007-2018 Jeep JK Wrangler!

LED Light Kit Includes:
- Two semi-gloss black windshield mounting brackets
- Two 3" 16-watt square LED lights

This semi-gloss black A-pillar light mounting kit from Rugged Ridge includes a pair of light mounts and two 3" square LED lights. Crafted from high-grade steel with a semi-gloss black finish, these brackets can be easily attached to your JK Jeep's lower windshield mount using the existing mounting bolt holes. You won't need to do any drilling or cutting to install this light kit!

Features and Benefits of the Rugged Ridge Semi-Gloss Black A-Pillar Light Kit with Two 3" Square LED Lights (11027.10):
- Heavy-duty steel construction
- Semi-gloss black finish
- Waterproof
- Driving beam pattern
- Combined 1680 lumens of light
- Rugged Ridge logo in white on bottom of lights
- Uses existing mounting bolt holes
- No cutting or drilling required
- Easy installation

The LED lights from Rugged Ridge included in this kit are engineered and tested to optimize your adventure by effectively illuminating the area around you. These lights are vibration, corrosion and submersion tested for superior performance. Each bright waterproof 3" 16-watt square LED light has a driving beam pattern and puts out 840 lumens of light. The Epistar bulbs have a 30,000-hour lifespan!

2007-2018 Jeep JK Wrangler
2007-2018 Jeep JK Wrangler Unlimited

*Wiring harnesses are sold separately.

Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.

Order Rugged Ridge's 11027.10 Semi-Gloss Black A-Pillar Light Kit with Two 3" Square LED Lights for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

As you can see, with our 2016 Jeep Wrangler, we've installed a ton of LED upgrades. But we need more, so we're going to take it to the next level, by installing this Rugged Ridge windshield light kit. This kit comes with mounts made of heavy duty steel with your choice of a textured black, black, or stainless steel finish that would directly bolt onto your windshield without cutting or drilling.

It includes two cube LEDs that will be super bright, and help us when we're off-road. Today we're going to install it on our 2016 Jeep Wrangler. For this installation, you will need a 3/8 ratchet, 13 mm socket, T-40 torques bit, T-30 torques bit, and a pair of cutters, crimpers, and strippers.

Installation of these brackets is very simple. Just remove these two T-40 torques bolts from the A-pillar. Place your bracket on the A-pillar. Then install the bolts. Tighten the top bolt down first to compress the gasket, then you should be able to get the bottom bolt started. Repeat the process on the other side. Then install the light.

Remove the T-30 torque screws on the cowl so you can run the wiring through it. Grab your cube light, and put a bolt through the bottom of the bracket, and set it on the mount. Then install the lock washer, and nut. Plug in the pigtail, then run the wiring under the cowl, into the engine compartment. Now, repeat the process on the other side.

We have an aftermarket trail rocker kit that we're going to hook our lights up to, but you can hook yours up any way you would like. Reinstall the four screws on the cowl. Then you installation's finished. We installed the textured black bracket, but they're also available in gloss black, and stainless steel.

Here we are about 15 feet away from our wall, and as you can see, they are extremely bright. The only thing on are the two cube LEDs. They're really going to help out when we're off-road. Our Rugged Ridge windshield lights are installed. Installation was a breeze. The textured black works really well on this jeep. Installation's going to take you about 45 minutes, and before you know it, you'll be heading off-road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.