Rugged Ridge Bumper Mounted Light Bar For Three Lights Textured Black Jeep Wrangler JK 2007-2018
- Textured Black Finish
- Easy Installation
- No Cutting Or Drilling
- Durable Construction
Rugged Ridge Textured Black Bumper Mounted Light Bar for Three Lights for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Easily add auxiliary lighting to your 2007-2018 Jeep JK Wrangler's bumper with this Textured Black Bumper Mounted Light Bar for Three Lights from Rugged Ridge!
Features and Benefits of the Rugged Ridge Textured Black Bumper Mounted Light Bar for Three Lights (11232.20):
- Allows simple mounting of auxiliary lighting
- Fits up to three 7" lights or two 10" lights
- Durable construction
- Textured black finish
- Easy to install
- Bolts to existing mounting holes
- No cutting or drilling required
Rugged Ridge engineers this durable light bar to provide you with a simple way to add auxiliary lighting to your JK's factory bumper. The light bar bolts to existing mounting holes and installs easily without cutting, drilling or removing the bumper. With a few simple hand tools, you will be able to install your light bar and mount up to three 7" lights or two 10" lights on your Jeep while retaining its factory bumper.
*Lights are NOT included.
Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.
Order Rugged Ridge's 11232.20 Textured Black Bumper Mounted Light Bar for Three Lights for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
This kit comes with high quality mount with a textured black finish that easily bolts to the front bumper with no cutting or drilling. And it can mount up to three seven inch lights or two 14 inch light bars.
It utilized the factory mounting locations and will give your Jeep a nice rugged look while improving off-rad visibility. And today we're going to install it on our 2016 Jeep Wrangler.
Tools you'll need for this installation: 3/8 ratchet, 18 millimeter socket, 5 millimeter hex key, 13 millimeter wrench, 18 millimeter wrench, and a flat head screwdriver or trim removal tool.
The first step of this installation is actually installing the mounts for the mount. Now you don't need a lift for this. We have ours on lift just for video purposes. But these mounts are getting installed right here. Just like that. These are side specific. D is for the driver side, and since we're on the driver side, this is the one we're going to install.
I want to remove the six nuts holding in the skid plate just so I can get better access to the mount.
Put the nut on the wrench, and then there's a little access hole right here you can slide the wrench up through. Slide it over the bolt. Do the same thing with the top nut. Put the nut on the wrench and bring it all the way up.
Then repeat the process on the other side for the other bracket. You can reinstall the skid plate.
With the brackets fully secure you can install the mount. Then install the provided hardware.
Then tighten up all the bolts.
And your installation is finished.
Our rugged ridge bumper bar is installed. It's going to give us a lot more lighting options in the future. And even without lights, this gives it a killer look. Installation is going to take you about 30 minutes and before you know it you'll be heading off-road.