Rugged Ridge Cab Cover Weather Lite 4-Door Jeep Wrangler JK 2007-2018/JL 2018-2021

Rugged Ridge:
13318.10

Highlights

  • Trail Cab Cover
  • Weather Resistant
  • Vinyl Coated Polyester
  • Elastic Side Straps
MSRP $97.68
$87.99
You save 10%

Rugged Ridge Weather Lite Cab Cover for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4-Door Jeep JK Wranglers and 2018, 2019, 2020 and 2021 4-Door Jeep JL Wranglers.

This Weather Lite Cab Cover from Rugged Ridge offers the ultimate in protection from dust, dirt and light showers for the interior of your 2007-2018 4-Door Jeep JK Wrangler or 2018-2021 4-Door JL Wrangler!

Features and Benefits:
- Vinyl coated polyester fabric construction
- Reinforced elastic side straps and under body hooks hold cover in place
- Protects the interior of your JK or JL
- Simple to install
- No drilling necessary

Rugged Ridge manufactures this cover from high-grade vinyl coated polyester fabric. The cover is extremely easy to use and installs in minutes. Reinforced elastic side straps and under body hooks hold the cab cover in place. No drilling is required. The Weather Lite cover is perfect for inside storage or short term outdoor use.

*This cab cover is NOT machine wash or dry-able.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

If you have the top off your Jeep, whether it's parked inside or outside, it's a good idea to protect your interior from the elements. Today, we're going to show you how to protect the interior of your Jeep by installing this Rugged Ridge Weather Lite Cab Cover. This Rugged Ridge Cab Cover is made of vinyl coated polyester fabric, and it features underbody hooks and elastic straps to completely cover the cab and cargo area to stay in place and keep it nice and protected. It's perfect for indoor storage or for temporary outdoor use to protect your interior from dirt and moisture. Today, we're going to install it on our 2016 Jeep Wrangler.

What you're going to do, you're going to open up the cover to find the rear. You'll find the rear by locating these two black squares. These black squares are going to hook up right here. What we're going to do is throw this over the Jeep and then fold it back and then fold it forward and line it up. Locate the black square again and this seal right here is going to go right here. Do the same thing on both sides. Now, we're going to take it all the way up to the front.

Grab the hook on the rear, and you're going to place this hook right under the tailgate and then pull the strap to tighten it. Pull the cover down in front of the windshield. As you can see, it fits really nice with all the seams. Then you're going to open up the driver door, loosen both of these straps, attach them to the bottom of the door then close the door. Do the same thing on the rear door, then repeat the process on the passenger side. Get these seals into place, you're going to fold them right under this lip. Tighten the straps back here on the tailgate, then repeat that entire process for the passenger side.

Go around the vehicle and check and make sure all the straps are tight, all the seals are in and then your installation's finished. Our Rugged Ridge Cab Cover is installed. It's definitely going to protect our interior from water. It's only going to take about 15 minutes to install and, before you know it, you'll be heading off-road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.