Rugged Ridge Cargo Cover C3 4-Door Jeep Wrangler JK 2007-2018

Rugged Ridge:
13260.01
Rating:
95% of 100

Highlights

  • Water-Resistant
  • Easy To Install
  • Flip Out Cover Flap
  • Built-In Front Curtain
MSRP $232.14
$208.99
You save 10%

Rugged Ridge C3 Cargo Cover for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4-Door Jeep JK Wranglers.

Do you lead an active lifestyle? Adventuring out into the wild to hike, bike, fish, or kayak with your 2007-2018 4-Door Jeep JK Wrangler and hauling all of your gear? If you do, then you might want to think about a better way to protect the interior cargo area of your Jeep. So check out this Rugged Ridge C3 Cargo Cover from CJ Pony Parts!

Rugged Ridge C3 Cargo Cover 13260.01 Features:
- Made from water-resistant woven ballistic fabric
- Complete coverage and protection of cargo area
- Full coverage with rear seats up, partially or fully lowered
- Protects carpet and plastic trim from scratches, dirt, and other debris
- Flip out cover flap to keep debris from falling into rear tailgate door gap
- Built-in front curtain to keep items and pets from entering front seat area
- Side retention system keeps cover in place
- Easy to install and remove

Manufactured to be as tough as your JK, this C3 Cargo Cover from Rugged Ridge is made from water-resistant woven ballistic fabric. It provides full coverage of your cargo area to protect the carpet and trim from being scratched up or soiled from dirt and other debris that is tracked in from your adventures. The flexibility of the cover allows it to be used whether you have your rear seats up, partially lowered or completely lowered for more space. It even features a built-in front curtain to keep items that are in the cargo area or pets from entering the front seating area and becoming a hindrance while driving! The unique side retention system keeps the cover held in place while you are loading and unloading, and a flip-out cover flap will keep debris from falling into the rear tailgate door gap while unloading. The C3 Cargo Cover was designed to be simple to install and remove for the protection you want when you need it.

Please Note: This Cargo Cover is designed to fit 2007-2018 4-Door Jeep Wranglers that do NOT come equipped with the factory subwoofer and 2015-2018 Wrangler JKs with a floor-mounted subwoofer. This will cover the floor mounted subwoofer in 2015-2018 JK Wranglers.

Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.

Order this Rugged Ridge 13260.01 C3 Cargo Cover for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 4-Door Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

Today we're looking at a Rugged Ridge Rear Cargo Cover fitting your 2007-2017 4-door Jeep Wrangler without the factory sub- woofer. Today, we're also going install it. If you have pets or haul cargo in your Jeep, and you want a way to protect your interior and yourself, this cargo cover is a great idea. This Rugged Ridge Cargo Cover is made of ballistic weave nylon for strength and durability and it covers and protects the carpet and interior trim of your whole cargo area from dirt and debris with or without the rear seats folded down. It also includes a curtain to separate you from the cargo area. Today we're going to install it on our 2016 Jeep Wrangler.

We're in the rear cargo area of the Jeep. The first thing we're going to do is apply the Velcro strips that come with the kit. Now, it comes with two strips and you need to cut them both into three pieces. Then, once you have your six pieces, three are going to go on the driver's side and three will go on the passenger side. On the driver's side, you're going to put a piece of Velcro here, one right here and the third piece down here. But, before you install them, make sure you clean the surface with alcohol and then put the adhesion promoter on there. Clean the surface with alcohol, now we're going to use the provided adhesion promoter and apply that where the Velcro strips are going to go. This is kind of nasty stuff, so it's a good idea to wear gloves when applying this. Give this about a minute to dry, then you can put on the Velcro. Now, install the three pieces of Velcro. With these three pieces installed, we can go to the passenger side now. On the passenger side, we're going to put our Velcro strips on the plastic trim right here. We're going to put one here, here, and then one down here. It looks like our strips are a little bit long for up here, so we're going to trim these to fit a little better and then we'll install them. We can now install the Velcro strips.

Okay. Next up is we're going to lower the rear seats. Lift up on this lever and pull forward. We can now place the cargo liner inside the Jeep. You're going to put this to where these bungee cords are up towards the front. These are going to go around the headrests on the rear seats. So, when you lay it down, make sure the black is facing up and the gray is facing down. Wrap the bungee cords around the rear headrests. Wrap the bungee cords around the rear headrests, pull it around, and get it through this hoop. We do this to both rear headrests. Undo this portion of the Velcro to get it around the roll bar. Undo this section to get it around the seatbelt. Then, you're going to shove the edge of this cover in between the liner here and the body. Install this portion of the Velcro. Using a flathead screwdriver, we're going to push the edge of this fabric underneath the seal for the tailgate. We're going to put this Velcro strap around the headrest, just loop it around the headrest and then get it back onto the cover. Do the same thing to the passenger side.

This is the configuration for if you have the rear seats down, but now I'm going to show you what it looks like with the rear seats up. You can have it split to where you only have one seat up, not the whole rear seat, or you can have both rear seats up. To properly secure the cover with the rear seats up, you're going to lift up on this Velcro right here and that will expose this hook underneath the rear seat. Take the Velcro strap that would wrap around the front headrests and wrap that around the loop and now you've properly secured it. Once you secure the other side, your installation is finished. Our Rugged Ridge C3 Cargo Liner is installed. It looks nice and it'll definitely give us a lot of added protection back here. We can pretty much throw anything we want in here now. Installation's not too bad; it should only take about 20 to 30 minutes. And, before you know it, you'll be heading off road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.