Rugged Ridge Door Hinge Cover Black Textured Set 2-Door Jeep Wrangler JK 2007-2018
- Covers Factory Hinges
- Steel Construction
- Textured Black Powder Coat
- 4 Total Covers
Set of Rugged Ridge Textured Black Door Hinge Covers for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 2-Door Jeep JK Wranglers.
Are the door hinges on your 2007-2018 Jeep Wrangler starting to rust or are just looking a bit rough? Well, if you don’t want to fully replace the hinges then you might want to check out this Set of Rugged Ridge Textured Black Door Hinge Covers from CJ Pony Parts! This set of Hinge Covers is a great way to refresh the hinges on your Jeep and add a new look.
Rugged Ridge Door Hinge Covers 11202.04 Features and Benefits:
- Sold as 2 Pairs
- Constructed from Cast Steel
- Textured Black Finish
- Beefy New Look
- Will Not Rust
- Includes Hardware
- Easy to Install
This Set of Rugged Ridge Textured Black Door Hinge Covers come as a set of 2 pairs which will complete all of the door hinges on your 2-door Jeep Wrangler. The Door Hinge Covers are constructed from cast steel which provides excellent durability to the covers for a long lasting design that will not rust. It features a textured black finish that adds a beefy and rugged off-road look to your JK. The hinge covers are easy to install with the included hardware so that you can be hitting the trails with a new style in no time!
Since 2005, the fine folks at Rugged Ridge have strived to produce rugged and durable parts for Jeep owners and off-roading enthusiasts alike. As the market for Jeep and off-roading parts has grown in the past decade-plus, so too has the product line from Rugged Ridge. A division of Omix-ADA, Rugged Ridge has produced over 3,000 Jeep parts since its genius in 2005, and has never wavered in its quest to provide Jeep owners with Wrangler parts that are built to last!
Order this Set of Rugged Ridge 11202.04 Textured Black Door Hinge Covers for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 2-Door Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
These hinge covers are super easy to install. The only tool you'll need is a T47 Torx bit and a 3/8 ratchet. Now, getting these Torx bits on can be a little difficult because these bolts are painted over. So you might need to tap them on with a hammer, or just wiggle them in to get them in nice and tight. If you don't, you could strip it. You wanna give it just a few love taps to get it in there, because of the paint, and now it's seated nice and good. It's not loose. Get your 3/8 ratchet on there and break it loose. Now, you can completely remove this bolt and the other bolt on this hinge but I would not recommend doing both hinges at the same time.
Grab your hinge cover and the provided hardware, and install it onto the hinge. You might need to open up the door and lift up on it to align these bolts. If not, the doors probably gonna sag down. Then tighten the bolt with a 6-millimeter hex key. Now you're ready to move on to the bottom hinge and repeat the process for that hinge, and the other side, then your installation's finished. Our Rugged Ridge hinge covers are installed. I absolutely love the way they look on this Jeep. The textured black matches everything else really well. Installation's super easy, it should only take a couple minutes and before you know it, you'll be heading off-road.