Rugged Ridge Euro Taillight Guard Textured Black Pair Jeep Wrangler JK 2007-2018

Rugged Ridge:
11226.11
Rating:
100% of 100

Highlights

  • Steel Construction
  • Black Powder Coated Finish
  • Protects Taillights
  • Easy Installation
MSRP $60.50
$59.99
You save $0.51
Earn
points.

Pair of Rugged Ridge Black Textured Euro Taillight Guards for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

Protect your 2007-2018 Jeep JK Wrangler's taillights from debris and damage while adding an aggressive off-road look to your JK with this Pair of Black Textured Euro Taillight Guards from Rugged Ridge!

Features and Benefits of the Pair of Rugged Ridge Black Textured Euro Taillight Guards (11226.11):
- Completes driver and passenger sides
- Made out of durable powder coated steel
- Protects your JK's taillights
- Adds custom style to your Wrangler
- No drilling required
- Easy to install

Rugged Ridge's taillight euro guards are constructed of durable powder coated steel then given a bold textured black finish. No drilling is necessary for a simple installation onto your JK.

Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.

Order this Pair of Rugged Ridge 11226.11 Black Textured Euro Taillight Guards for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

Today on CJ Off-Road, we're going to show you how to protect your taillights. If you want to add some more protection to the rear of your Jeep Wrangler, specifically your tail lights, then you're going to want to look at these Rugged Ridge Euro Taillights in the textured black, fitting your 2007 to 2018 Jeep Wrangler. These Euro-style taillight guards are constructed of a durable steel material and then powder coated in a textured black. They feature a five-bar design to give you added strength around the taillight. Now, they're going to include new screws as well as spacers to space them a little bit out from your taillight, that way you don't cause any damage to the factory taillight.

Today, we're going to get them installed on our 2008 Jeep Wrangler. We're going to get started with the install of these taillight guards. Now, the only tool you need is a Phillip's head screwdriver. We're going to get started on this passenger side taillight. We're going to remove the factory screws and set them aside, as the kit does come with new hardware. Start up top, right up. The goal while removing the taillight is to actually leave it on the Jeep, that way it doesn't fall all over the place for you.

With all of the hardware removed, you're now ready to put the taillight guard on. As I mentioned before, the taillight guards are contoured to give you the maximum protection. As you can see, on the passenger side here, it's wider up at the top and then it narrows down toward the bottom. Make sure you have the right guard on the right side. As you can see, this kit does come with two different styles of screws, one has a larger head and then the other one has a smaller, fine thread with a smaller head on the top. Now, the one with the larger top goes through the outside of the lens, and this narrower one here will go towards the inside of the Jeep. Make sure you do it properly, as it won't line up if you don't.

Now, what I like to do is actually put the screws in first. As you can see, I put the wider one on the outside. Then the narrower one right here on the inside. This helps me out when I put the spacers behind them, to keep everything in place. Let's go ahead and put this up with the spacers onto the taillight. Now, what I like to do first is to get this inside screw lined up, put the spacer on the screw and then just start it with a few threads, that way this is going to hold the entire taillight. With that one tightened down, we'll put these spacers behind each screw and get them started. Once they're all started, go ahead and tighten them down with a Phillip's head screwdriver. I'll get them snugged up, go around make sure they're all snugged up, and then we'll fully tighten them down.

Once you have all these tightened up, repeat the same steps on the other side and your installation is complete. We just finished up the install of our Rugged Ridge Euro Taillight Guards, and they look really great, plus they're going to add a ton of functionality to the back of our Wrangler. You only need a Phillip's head screwdriver, and the installation should take no more than 10 minutes. Now, you can find these taillight guards, as well as many other parts for your JK, right here at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Wrangler years:

  • 2007,
  • 2008,
  • 2009,
  • 2010,
  • 2011,
  • 2012,
  • 2013,
  • 2014,
  • 2015,
  • 2016,
  • 2017,
  • 2018,
Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account