Rugged Ridge Exterior Mirror Relocation Bracket With Door Filler Black Pair Jeep Wrangler JK 2007-2018
- Relocates Mirrors Off Of Doors
- Includes Filler Plates
- Mirrors Mount To A-Pillar
- Sold As A Pair
Pair of Rugged Ridge Black Exterior Mirror Relocation Brackets with Door Fillers for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Take your 2007-2018 Jeep JK Wrangler to the next level with this Pair of Black Exterior Mirror Relocation Brackets with Door Fillers from Rugged Ridge! These custom designed brackets bolt into the existing holes on your JK's windshield to relocate your mirrors off its driver and passenger side doors.
Features and Benefits of the Pair of Rugged Ridge Black Exterior Mirror Relocation Brackets with Door Fillers (11025.04):
- Relocates side mirrors off your JK's doors
- Pair completes driver and passenger sides
- Bolts into existing windshield frame holes
- Comes with paintable filler plate
- Specifically designed for your Wrangler
These brackets are the perfect add-on accessory for those off-road adventures where you do not want your doors. Each bracket kit includes a special paintable filler plate to cover up the hole created when you remove your mirrors.
Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.
Order this Pair of Rugged Ridge 11025.04 Black Exterior Mirror Relocation Brackets with Door Fillers for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
All right, installing this relocation kit is super easy. All you'll need is a T40 Torx bit, and we're going to first remove the two T40 Torx bolts on the inside of the door to get the mirror off. All right, that's one bolt. Now, we'll remove the second one, but hold on to the mirror and make sure it doesn't fall off and break. Then remove the bolt on the bottom of the mirror to release the mirror from the bracket. Then, wiggle to the two pieces to separate them. Remove the two T40 Torx bolts on the A-pillar right here.
All right, now you're going to grab the bracket for the driver's side. You'll know it's a driver's side because it lines up nicely with the A-pillar. Then, you're going to install this with the hardware you just removed. Install the lower bolt. It's tucked up inside of this bracket. Place the mirror into the bracket. Install the bolt in the bottom. Finally, we'll install the fill plug in the door. Install the factory hardware. Tighten up the factory bolts. Repeat the process on the other side, then your installation is finished.
Okay, we've got our Rugged Ridge mirror relocation kit installed. It's going to allow us to remove the door and keep factory mirrors on. Installation's not too bad. It's only going to take you about 45 minutes. Before you know it, you'll be heading off-road.