Rugged Ridge Hood Deflector Matte Black Look Jeep Wrangler JK 2007-2018
- Protects The Hood & Windshield
- Aerodynamic Design
- Matte Black Finish
- Made With High Grade Acrylic
Rugged Ridge Matte Black Look Hood Deflector for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
This Matte Black Hood Deflector from Rugged Ridge is aerodynamically designed and engineered to protect your 2007-2018 Jeep JK Wrangler's hood and windshield from bugs and road debris!
Features and Benefits of the Rugged Ridge Matte Black Hood Deflector (11348.02):
- Protects your Wrangler's hood and windshield
- Aerodynamic design
- Adds unique, custom styling to your JK
- Installation is easy
Rugged Ridge's matte black bug deflector will look great mounted on your JK Wrangler and make it stand out from the crowd. Installation is simple using double-sided automotive grade adhesive tape and under hood screws.
Please Note: Minor drilling is required for installation of this hood deflector.
Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.
Order Rugged Ridge's 11348.02 Matte Black Hood Deflector for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
The first thing we're going to do is obviously open up the hood. All right, once you have the hood open, you're going to grab the hood deflector and install it onto the hood, mock it up, and see where it's going to go. As you can see, there's four tabs on here. There's a tab right here that lines up with the hole in the hood. There's a tab here with double-sided tape, another one right here with double-sided tape, and then another tab here that lines up with the hole on the hood.
Now that we know where it's going to go, we're going to put the clips right here that will accept the screws. Then we need to clean this area and this area with alcohol so it can stick really well. Install the provided clips in the hood. Wipe the hood with alcohol to make sure it's real clean so the tape can stick to it. Then you're ready to throw on the deflector. Peel off the backing to the double-sided tape. With both pieces of tape peeled, place it on the hood. Then install your screws. Get your first screw in but don't fully tighten it just yet. Install the second screw. Then you can fully tighten this one. Come back and fully tighten the first screw. Then press the tape onto the hood, hold it on there for about 30 seconds, make sure it sticks really well, and then your installation's finished.
Our Rugged Ridge Hood Deflector is installed. It matches our Jeep really well and it goes with the headlight bezels perfectly. Installation is super easy. It's going to take five to ten minutes. Before you know it, you'll be heading off road.