Rugged Ridge Hood Light Bar Kit Semi-Gloss Black With Three 3-1/2" Round LED Lights Jeep Wrangler JK 2007-2018

Rugged Ridge:
11232.06
MSRP $342.14
$300.99
You save 12%

Rugged Ridge Semi-Gloss Black Hood Light Bar Kit with Three 3-1/2" Round LED Lights for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

Light up the off-road trails in style with this awesome Semi-Gloss Black Hood Light Bar Kit with Three 3-1/2" Round LED Lights from Rugged Ridge. It's designed specifically for your 2007-2018 Jeep JK Wrangler and features a simple, bolt-on installation!

Features and Benefits of the Rugged Ridge Semi-Gloss Black Hood Light Bar Kit with Three 3-1/2" Round LED Lights (11232.06):
- Mounting bar has stylish and durable semi-gloss black finish
- Five mounting locations
- 1040 lumens per light (3120 total lumens)
- Waterproof
- Driving beam pattern
- Easy bolt-on installation
- Attaches to your JK's hood with existing OE hardware

This Hood Light Bar Kit easily mounts to the top of your JK's hood using existing OE hardware and has five light mounting locations so you can choose where you would like to attach your new LEDs. The mounting bar has a stylish semi-gloss black finish for long lasting use!

The three LED lights from Rugged Ridge included in this kit are engineered and tested to optimize your adventure by effectively illuminating the area around you. The LED lights are vibration, corrosion and submersion tested to ensure optimal performance. The bright waterproof 3-1/2" 18-watt round LED lights have driving beam patterns and put out a total of 3120 lumens of light. The Epistar bulbs have a 30,000-hour lifespan for worry-free operation on the trails!

Fitment:
2007-2018 Jeep JK Wrangler
2007-2018 Jeep JK Wrangler Unlimited

Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.

Order Rugged Ridge's 11232.06 Semi-Gloss Black Hood Light Bar Kit with Three 3-1/2" Round LED Lights for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

When going off-roading you can never have too much visibility, and as you can see with our 2016 Jeep Wrangler, we've done a ton of LED upgrades, but they're just not enough. We are going to take our Jeep a step further by installing a rugged ridge hood light bar kit.

This kit comes with a mount made of heavy duty steel with you choice of a texture black or gloss black finish. They will directly bolted to your hood with no cutting or drilling, and it comes with three round LED's that are super bright and will really help when we're off road. So today we are going to install it on our 2016 Jeep Wrangler.

For this installation you will need a 3/8th's ratchet, 13mm socket, T-47 Torx bit, 6mm hex key, 13mm wrench, and a set of cutters crimpers and strippers.

The very first part of the installation is just assembling the mount itself. It's pretty easy. It's only six screws. We'll assemble the bracket. Then we install the provided hardware on each side. Then use a 5mm hex key to tighten it all together ... and do the other side. Now it can go on the Jeep.

With the mount assembled. Remove the 4 T-47 Torx bits securing the hood to the hinge. Now, getting the Torx bit in there might take a little bit of persuasion because they are painted over, and it's not that easy to get it in there, but with a little bit of wiggling and persuasion, it will go in.

Grab the provided gaskets and install one on each hinge.

Then install the bracket. Be very careful not to scratch your paint.

The lights are ready to be installed now. The light does require some assembly, but before you assemble it, grab a bolt or a spare bolt, and run it through the threads a couple of times because the powder coat makes it really tough to thread it in by hand. Then it's all good.

Grab the bracket and the shorter bolt that comes with the lights. Put a lock washer on there, then the regular washer and thread it into the light. Do the same thing on the other side. Then you can tighten them up, but don't make them too tight because you will probably want to adjust the bracket when it's on the Jeep, and now it's ready to go on the bar. Put the provided bolt through the bracket. Now there are four different mounting locations; however, we're going to use this middle one right here. Now with the bolt through the bracket, slide it onto the mount, then put the big washer on the bolt and then the nylon nut, and to tighten this you'll need a 13mm wrench and a 13mm socket.

And just repeat this same process for the rest of the lights, and to get the harness through the hood, just lift up the hood and slide it through the crack right next to the hinge. you can wire the lights up however you would like; however, we have this painless performance trail rocker kit that we're going to wire the lights into. This trail rocker kit allows you to easily install auxiliary lighting. We really recommend that you get on. It makes it really easy. You need to run the power wire for the lights to a 12 volt source which we're going to run to this wire for the trail rocker kit. Then all you need to do is wire up the grounds and your installation is finished.

And this is what it looks like with a gloss black bar.

You can choose how to wire the lights up however you would like. However, we chose to wire it up to the trail rocker. Now we're going to see how bright they are, and this is what it looks like lit up. This is just the 3 LED's lit up. It is super bright, and it looks really good too.

Our Rugged Ridge Hood Light Kit is installed. It looks great. The textured black matches the fenders and mirrors really well, and the circled lights match the headlights and fog lights well too. It's going to help out a lot with off-roading. It's really bright. Installation is going to take you about an hour, and before you know it, you'll be heading off road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.