Rugged Ridge Hood or Door Hinge Cover Black Textured Pair Jeep Wrangler JK 2007-2018
Pair of Rugged Ridge Textured Black Hood or Door Hinge Covers for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Looking for a simple way to dress up the exterior of your 2007-2018 Jeep JK Wrangler? Then take a look at this Pair of Rugged Ridge Textured Black Hood or Door Hinge Covers from CJ Pony Parts! These hinge covers will add a great new look to your JK and are easy to install.
Rugged Ridge Hinge Covers 11205.10 Features and Benefits:
- Sold as a Pair
- Constructed from Cast Steel
- Textured Black Finish
- Beefy New Look
- Will Not Rust
- Can be Used on Door Hinges or Hood Hinges
- Includes Hardware
- Easy to Install
Rugged Ridge sells these Hinge Covers as a pair to complete your Jeep Wranglers hood hinges or the hinges on one of the doors. They are constructed from cast steel for long lasting durability that will not rust and will stay looking fantastic on your JK. The textured black finish and beefy construction will look great on your Jeep and provide a more rugged appearance. With the included hardware, these hinge covers are easy to install so you can be hitting the trails in your Wrangler with a new style in no time!
Please Note: Hoods will require 1 pair, 2 door Wranglers will require 2 pairs and 4 door Wranglers will require 4 pairs.
Since 2005, the fine folks at Rugged Ridge have strived to produce rugged and durable parts for Jeep owners and off-roading enthusiasts alike. As the market for Jeep and off-roading parts has grown in the past decade-plus, so too has the product line from Rugged Ridge. A division of Omix-ADA, Rugged Ridge has produced over 3,000 Jeep parts since its genius in 2005, and has never wavered in its quest to provide Jeep owners with Wrangler parts that are built to last!
Order this Pair of Rugged Ridge 11205.10 Textured Black Hood or Door Hinge Covers for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Tools you'll need for this installation: 3/8" ratchet, T 47 Torx Bit, and a 6 millimeter hex key.
These hinge covers are super easy to install. The only tool you'll need is a T 47 Torx Bit and a 3/8" ratchet. Now getting these Torx Bits on can be a little difficult because these bolts are painted over. So, you might need to tap them on with a hammer or just wiggle them in to get them in nice and tight. If you don't, you could strip it. I'm going to give it just a few love taps to get it in there, because of the paint. And now it's seated nice and good. It's not loose. Get your 3/8" ratchet on there and break it loose. Now you can completely remove this bolt and the other bolt on this hinge, but I would not recommend doing both hinges at the same time.
Grab your hinge cover and the provided hardware and install it onto the hinge. You might need to open up the door and lift up on it to align these bolts. If not the door's probably going to sag down. Then tighten the bolt with the 6 millimeter hex key. Once you've finished installing this one, you can move on to the other hinge and your installation is finished.
Our Rugged Ridge hinge covers are installed. I absolutely love the way they look on this Jeep. The textured black matches everything else really well. Installation is super easy. It should only take a couple minutes and before you know it you'll be heading off-road.