Rugged Ridge Light Bar Kit Bumper Mounted Stainless Steel With Two 3-1/2" Round LED Lights Jeep Wrangler JK 2007-2018

Rugged Ridge:
MSRP $333.28
You save 21%

Rugged Ridge Stainless Steel Bumper Mounted Light Bar Kit with Two 3-1/2" Round LED Lights for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

Add auxiliary lighting to your 2007-2018 Jeep JK Wrangler's factory bumper with this easy-to-install Stainless Steel Bumper Mounted Light Bar Kit with Two 3-1/2" Round LED Lights from Rugged Ridge!

Light Bar Kit Includes:
- One stainless steel bumper mounted light bar
- Two 3-1/2" 18-watt round LED lights

This kit includes one stainless steel bumper mounted light bar and two 3-1/2" round LED lights for optimal illumination while you're out on the trails. Rugged Ridge engineers this durable light bar to easily bolt to your Wrangler's existing mounting holes and install without cutting, drilling or removing your JK's bumper. With a few simple hand tools, you will be able to install your light bar and mount up to three lights on your Jeep while retaining your factory bumper.

Features and Benefits of the Rugged Ridge Stainless Steel Bumper Mounted Light Bar Kit with Two 3-1/2" Round LED Lights (11138.23):
- Crafted from durable and stylish stainless steel
- Bright LED lights are energy efficient
- 1040 lumens of light from each LED
- Allows you to mount up to three lights
- Mounts to existing mounting points
- Easy to install
- No cutting or drilling is necessary

The pair of LED lights from Rugged Ridge included in this kit are engineered and tested to optimize your adventures by illuminating the area around you. These LED lights are vibration, corrosion and submersion tested. Each bright waterproof 3-1/2" 18-watt round LED light has a driving beam pattern and puts out 1040 lumens of light. The Epistar bulbs have a 30,000-hour lifespan!

2007-2018 Jeep JK Wrangler with a factory front bumper
2007-2018 Jeep JK Wrangler Unlimited with a factory front bumper

Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.

Order Rugged Ridge's 11138.23 Stainless Steel Bumper Mounted Light Bar Kit with Two 3-1/2" Round LED Lights for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty


Novice skill is required for this installation.

Installation Videos

Video Transcript

When going off-roading, you can never have too much light. On our 2016 Jeep Wrangler, we just installed a Rugged Ridge headlight kit, and today we're going to go a step further by installing a Rugged Ridge bumper light kit. This kit comes with a high-quality stainless steel mount that bolts to the front bumper with no cutting, or drilling. It comes with two 3-1/2 inch LED lights, but it can support up to three, seven inch lights, or two 14 inch light bars.

It utilizes the factory mounting locations, and will give your Jeep a nice rugged look, while improving off-road visibility. Today we're going to be installing it on our 2016 Jeep Wrangler. Tools you'll need for this installation: 3/8 ratchet, 18 mm socket, 5 mm hex key, 6 mm hex key, 13 mm wrench, 18 mm wrench, a flat head screw driver, or a trim removal tool, and a set of cutters, crimpers, and stripers.

The first step of this installation is actually installing the mounts for the mount. Now you don't need a lift for this. We have on ours for a lift, just video purposes. But these mounts are going to install right here. Just like that. These are side specific, "D" is for the driver's side, and since we're on the driver's side, this is the one we're going to install.

I'm going to remove the six clips holding in the skid plate, just so I can get better access to the mount. Put the nut on the wrench, and then there's a little access hole right here, you can slide the wrench up through. Slide it over the bolt. Do the same thing with the top nut. Put the nut on the wrench, and bring it all the way up. Then repeat the process on the other side for the other bracket.

You can reinstall the skid plate. With the mounts fully secured, you can install the bar. Install the provided hardware, with a washer on each side. Tighten everything down, with a 13 mm wrench, and 5 mm hex key. The light does require some assembly, but before you assemble it, grab a bolt, or a spare bolt, and run it through the threads a couple times, because the powder coat makes it really tough to thread it in by hand. Then it's all good.

Grab the bracket, and the shorter bolt that comes with the lights. Put a lock washer on there. Then the regular washer, and thread it into the light. Do the same thing on the other side. Then you can tighten them up, but don't make them too tight, because you'll probably want to adjust the bracket when it's on the Jeep. Now it's ready to go on the bar. Once you get your lights assembled, you can install them on the bar.

Then tighten them down with a 13 mm wrench and socket. Then repeat the same process for the rest of the lights. We're at the point now, where we can wire up the lights. You can wire these on any way you would like. However, we have a Painless Performance Trail Rocker system that we're going to wire them into.

This trail rocker kit allows you to easily install auxiliary lighting. We really recommend that you get one. It makes it really easy. Need to run the power wires for the lights to a 12 volt source, which we're going to run to this wire for the trail rocker kit. Then all you need to do is wire up the grounds, and your installation's finished.

Okay. Let's see how they look. Here we are about 15 feet away from our wall. As you can see, they are incredibly bright, and they give a nice pattern. They'll really help out when we're off-road. Our Rugged Ridge bumper bar's installed. The bar itself looks great on the front of the Jeep, and the circle lights match the other lights really well. Installation's going to take you about an hour. Before you know it, you'll be heading off-road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.