Rugged Ridge Multi-Mount Dash Tray With Cell Phone Holder Jeep Wrangler JK 2011-2018
Rugged Ridge Multi-Mount Dash Tray with a Cell Phone Holder for all 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Comply with 'hands free' laws and add a secure mount for your cell phone while driving on the pavement or the dirt with this Rugged Ridge 13551.16 Multi-Mount Dash Tray with a Cell Phone Holder. Along with giving your mobile device a convenient attachment point in your 2011-2018 Jeep Wrangler JK, you'll have a tray for easy access to loose change, pens or whatever else you store there.
Features and Benefits:
- Custom fit cradle for smart phones or cameras
- Provides hands free device access
- No drilling, easy dash recess mounting
- Patented Rugged Ridge design
Whether you're on your way to work or on the trail, the custom fitted cradle on this Rugged Ridge 13551.16 Multi-Mount Dash Tray will keep your mobile device secure. No drilling required, this dash tray easily mounts to the recessed area in the dashboard of your 2011-2018 JK Wrangler. The tray allows for some additional storage which is a much needed addition to any Wrangler. Don't miss filming anything that ventures into your path when you mount your smart phone, Go Pro or point-of-view camera to allow for hands free filming.
Please Note: The cell phone mount will accept smart phones up to 3.6 inches wide.
Order this Rugged Ridge 13551.16 Multi-Mount Dash Tray with a Cell Phone Holder for your 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today.
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
Installing this dash tray is pretty easy. Just remove the factory tray that's in the dash. You're probably not going to be able to see it but then we have to remove a seven millimeter screw that's in the center of this hole. It's the only screw down here so you can't miss it. Once you remove it, grab the mount and you're going to put that screw through the hole in the mount and then reinstall this screw from where you just removed it.
Okay. Now it's nice and secure. You can now install the removable tray that comes with the kit. Easily goes into place and then if you need to clean it or remove your item, just simply pull it out. Then if you want to install the phone mount take the cap off of the back. Place it over the mount like that. Press it on and then tighten the cap.
Your installation is basically finished here but I want to show you the four different settings of this mount. The first setting is right here. You can have just your phone mounted to this and nothing else. But if you wanted to have your phone mounted here and also say a GoPro camera, loosen this and then spin the mounting screw with this gear right here. Remove this plate, and with the plate removed you have the tripod screw sticking up and you can mount a camera here while you have your phone mounted. Or if you don't want your phone mounted here you can take it off. Then in this setting, you have no accessory here. This is for if you want no device hooked up, it's just the tray. But if you want say just a GoPro camera, loosen the screw again, turn this around, and then get the screw through the blank hole. And there you go. You can mount your GoPro there and store your items here. And your installation is finished.
Our Rugged Ridge dash tray is installed. This seriously looks like it could have been a factory piece. It fits really well in this dash. Installation is super easy, maybe five or ten minutes, and before you know it you'll be heading off-road.