Rugged Ridge Receiver Hitch 2" With Hardware Jeep Wrangler JK 2007-2018
Rugged Ridge 2" Receiver Hitch with Hardware for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Add this awesome, premium quality 2" Receiver Hitch with Hardware from Rugged Ridge to your 2007-2018 Jeep JK Wrangler. Its custom design bolts directly to the factory mounting points on the rear of your JK!
Features and Benefits of the Rugged Ridge 2" Receiver Hitch with Hardware (11580.10):
- High-grade solid steel construction
- One-piece welded assembly for added strength
- Durable black powder coat finish
- Includes cutout for factory wiring harness mounting
- Bolts to factory mounting points
- Built to match your JK's tow capacity
- Similar design to OE receiver hitch
- Comes with mounting hardware
This receiver hitch has a very similar design to the OE component. Its strong steel construction and durable powder coat finish are designed to displace water to keep the hitch rust free. It includes a cutout for factory wiring harness mounting. Rugged Ridge engineers the hitch as a one-piece welded assembly for added strength built to match the towing capacity of your JK Wrangler.
2-Door JK - Up to 2,000 lbs. / 200 lbs. tongue weight
4-Door JK - Up to 3,500 lbs. / 350 lbs. tongue weight
Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.
Order Rugged Ridge's 11580.10 2" Receiver Hitch with Hardware for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wranglers from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
If you're looking to tow with your new 2018 Jeep JL Wrangler, then today we're going to be installing this rugged ridge hitch with the hardware fitting your new 2018 JL Wrangler, equipped with a plastic, molded rear bumper.
This rugged ridge hitch is made out of a quarter-inch steel, oven-powder coated in a durable gloss black finish, and includes all the hardware to get it mounted up onto your JL. And it's going to provide a great place to tow or add recovery points to the back of your Jeep. It features a little cut-out for the wiring harness, so let's get it installed on our 2018 Jeep JL Wrangler.
As with the JKs, the rear cross-member is where the hitch mounts on the new JL. We're gonna use the same hitch style. And this is going to be used with all the factory plastic bumpers. You simply slide it over the cross-member and then use four bolts and put them on through. Let's get started.
Go ahead and slide the hitch receiver up. And then put your bolt and washer through the back. Get the one started, then we can work on the rest. We're gonna put a washer and a nut on the outside. It's a little bit tight up there, but if you work at it, you'll get it.
Go ahead and tighten them up. Now you're gonna use a 19-millimeter socket with a 19-millimeter box wrench. Once you have all four bolts tightened up, your installation's complete.
And with just four bolts, the installation of our new hitch receiver on our JL is complete. It looks awesome, plus it's gonna serve a really nice purpose for our new Jeep. You only need a 19-millimeter box wrench and a 19-millimeter socket to get it installed. Takes about 15 minutes.
And you can find it here, as well as many other great parts for a new JL, right here at CJPonyParts.com.