Rugged Ridge Rocker Guard RRC Side Armor Pair 4-Door Jeep Wrangler JK 2007-2018
- Rrc Rocker Armor
- Fits 4 Door JK Wranglers
- 400Lb Weight Limit
- Textured Black Finish
Pair of Rugged Ridge RRC Side Armor Rocker Guards for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4-Door Jeep JK Wranglers.
Taking your 2007-2018 Jeep Wrangler JK off-road is one of the most enjoyable parts of your week, but the rough terrain can do serious damage to your JK's side and undercarriage. Protect it as much as you can by adding these Rugged Ridge 11504.20 Rocker Guards.
This pair of Rugged Ridge rocker guards (P/N: 11504.20) are made using heavy-duty steel tubing and finished in a durable black textured powder coat for added strength against off-road debris and potential damage to your rocker panels. The finish resists scratches and provides a non-slip surface for door entry. The simple bolt-on design utilizes your JK's factory mounting locations, so installation is easy and doesn't require any drilling or body modifications. All of the necessary installation hardware is included with this pair of rocker guards. They have a 400lb weight limit.
Rocker Guard Features:
- Constructed from 2 x 0.120 Inch Steel Tubing
- Finished with a Textured Black Powder Coat
- 400lb Maximum Weight Limit
- Bolt-On Design
- Uses Factory Mounting Locations
- Includes Installation Hardware
- Easy to Install
Please Note: These rocker guards will not fit the factory rock rail option.
Order this Pair of Rugged Ridge RRC Side Armor Rocker Guards for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 4-Door Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
Taking your Jeep off road can really damage the undercarriage if not protected, so today, we're looking at these Rugged Ridge RRC rocker guards fitting your 2007 through 2018 four door Wrangler. These heavy duty rocker guards are constructed of a two inch steel tubing and finished with a durable textured black powder coat. They feature a simple bolt-on design and have a max load capacity of 400 pounds per side. The installation only requires removing a few nuts and bolts, so let's get them installed on our 2016 Jeep Wrangler.
Tools needed for this installation: a five-eighth inch socket, 18 millimeter socket, and a half inch ratchet.
All right, so we're at the front of our Wrangler. Now, the nice thing about these side guards is that you only need to remove six bolts on each side. We're going to start with the front body mount bolts. There's actually two that go up through the body, and this one larger one. All right, next step is going to be to remove these two outer nuts. Make sure you save these. You'll be using them later.
All right, and we're going to loosen up this larger bolt with the body washer on it. Just loosen this up, don't completely remove it. All right, and we're going to repeat the same steps as we did to the front onto the farthest rear mount.
The rock sliders can now be installed onto the Jeep. Make sure that the shorter end of the slider is towards the front of the vehicle on both sides. Now that everything is tightened up on this side, we can repeat the process on the other side and your installation is complete.
We've got these rocker guards installed and man, they look great. It's really going to help us get in and out of our Jeep. Install was pretty simple, took about two hours. It will help you to have an extra set of hands. Now, you can find these rocker guards and many other great parts at CJPonyParts.com.