Rugged Ridge Third Brake Light Extension Kit Jeep Wrangler JK 2007-2018
- Extends 3rd Brake Light
- Works With 33-34" Tall Tires
- Black Powder Coated Finish
- Simple Bolt On Installation
Rugged Ridge Third Brake Light Extension Kit for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
If you are going to run larger tires on your 2007-2018 Jeep JK Wrangler, chances are once you put your spare back in the stock spare tire carrier the third brake light is going to be completely covered. Not to worry, though, Rugged Ridge came up with a simple solution with this Third Brake Light Extension Kit!
Rugged Ridge Third Brake Light Extension Kit 11546.23 Features:
- Black powder-coated steel construction
- Adds two inches to the height of your third brake light
- Third brake light can now be easily seen over 33-34 inch tires
- Designed for use with stock or aftermarket spare tire carrier
- Includes necessary hardware
- Easy to install
This Third Brake Light Extension Kit from Rugged Ridge is constructed from steel for a durable design and has a black powder-coated finish to aid in preventing any corrosion. The extension will add two inches to your JK’s third brake light, elevating it high enough to be easily visible over a 33-34 inch tire. Rugged Ridge has designed this third light extension to work with stock or aftermarket spare tire carriers and they even include the necessary hardware needed for a quick and easy installation on your Jeep Wrangler.
- Third brake light extension
- (2) Long Phillips head screws
- (2) Short Phillips head screws
- (8) M8 x 30mm Hex bolts
- (8) M8 lock washers
- (8) M8 flat washers
- (4) M6 flat washers
Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.
Order this Rugged Ridge 11546.23 Third Brake Light Extension Kit for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
This third brake light extension is made of heavy duty steel, with a nice textured black finish. It features nine adjustment holes, and will work with the factory or aftermarket spare tire mount. And today we're going to install it on our 2016 Jeep Wrangler.
Tools you'll need for this installation; 3/8 ratchet, 10 millimeter socket, 13 millimeter socket, 10 millimeter wrench, Phillips screwdriver, T20 torch bit, a saws all, and safety glasses.
Very first thing we're going to do, is remove the spare tire.
Remove the eight bolts holding on the spare tire mount.
Remove the four T20 screws holding on the brake light. Unplug the third brake light.
In order to install the rugged ridge third brake light extension, the factory extension needs to be cut off the spare tire mount. We're just going to cut straight down here with a saws all.
You can now clean up your cuts, and make them nice and smooth.
Now you can install the third brake light extension behind the spare tire mount. Now this kit does come with hardware, However, we're going to use the factory hardware. We like the washers a little better. Now don't tighten these all the way, you need to keep these loose so you can install the bottom spacers.
Install the provided spacers on the bottom. Install the spacer on the other side. Then tighten them all down.
Run the wire through the spare tire mount. As you'll notice, this new extension is already at its lowest adjusting point and it's a couple inches higher than the factory light. As a result, the wire for the third brake light is not long enough, so you will need to extend the wire just a little bit to make it work.
Once you extend the harness to your liking, then you can mount the extensions where you'd like as well. In our case, we're going to use the lowest setting.
Now we're going to install the provided hardware.
Reinstall the spare tire, and your installation's finished.
Our rugged ridge third brake light extension is installed. We have plenty of clearance, even on the lowest setting. It can go all the way up to the roof. Installation is going to take about two hours. And before you know it, you'll be heading off road.