Rugged Ridge Windshield Light/Accessory Bar Kit Elite Fast Track With Three 13" LED Light Bars/Eight 3" Round LED Lights Jeep Wrangler JK 2007-2018

Rugged Ridge:
11232.57
MSRP $1,777.76
$1,599.99
You save 10%

Rugged Ridge Elite Fast Track Light and Accessory Bar Kit with Three 13" LED Light Bars and Eight 3" Round LED Lights for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

This innovative and versatile Elite Fast Track Light and Accessory Bar Kit with Three 13" LED Light Bars and Eight 3" Round LED Lights from Rugged Ridge allows you to customize your 2007-2018 JK's off-road lighting and accessory configurations!

Kit Includes:
- Elite windshield light bar bracket system
- Three 72-watt 13" LED light bars
- Eight 18-watt 3" round LED lights
- Full set of amber light covers
- Quick release mirror relocation kit
- A-pillar switch pod with four switches
- Wiring harness
- Mounting hardware

This innovative bracket system lets you easily adapt and change your Wrangler's lighting and accessory configurations. It incorporates a series of channels which run the length of your JK's A-pillars and crossover section so any variety or combination of lights, cameras, trail mirrors or accessories can be assembled and reconfigured in countless combinations.

Features and Benefits of the Rugged Ridge Elite Fast Track Light and Accessory Bar Kit with Three 13" LED Light Bars and Eight 3" Round LED Lights (11232.57):
- High-grade 6061 T6 aluminum construction
- Black textured finish
- Sturdy steel brackets
- Versatile design lets you change light and accessory configurations
- Mounts lights, cameras, trail mirrors or other accessories
- Lightweight and strong
- Compatible with most LED light bars
- Included light bars have a flood/driving combination pattern
- Round LEDs have driving beam pattern
- Integrated end caps alleviate airflow turbulence

This windshield light bar bracket kit is crafted from premium quality 6061 T6 aluminum. It is extremely lightweight but impressively strong and able to withstand the grueling conditions Jeeps are prone to endure. The light and accessory bar works with most LED light bars, regardless of length or whether they are curved or straight.

This bracket system has an aerodynamic design and integrated end caps which eliminate airflow turbulence, preventing soft top buffeting and annoying whistling. A durable black textured powder coat finish provides premium protection from the elements while sturdy steel brackets with Grade 8 mounting hardware ensure years of dependable service.

Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.

Order Rugged Ridge's 11232.57 Elite Fast Track Light and Accessory Bar Kit with Three 13" LED Light Bars and Eight 3" Round LED Lights for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We've just installed this Rugged Ridge Elite Fast Track Windshield Light Bar Kit and if you're looking for that one thing that will light up the entire trail, this thing is it and we're going to show you how to install it using our 2016 Jeep Wrangler. This kit comes with heavy duty aluminum mounts that bolt to the A-pillar, that hold eight round LEDs and three 13" inch light bars. That's going to be incredibly bright. It also comes with an A-pillar switch pod and wiring harnessing. We're going to show you how to install it using our 2016 Jeep Wrangler. Tools you'll need for this installation: 3/8" ratchet, 13mm socket, T30 Torx bit, T40 Torx bit, 10mm wrench, 13mm wrench, 2.5mm hex key, 5mm hex key, and basic wiring tools.

The very first thing we're going to do is assemble the A-pillar assemblies with the provided hardware. Install two of the square nuts into the slot of the A-pillar bracket. Once installed place two screws through the other A-pillar bracket and then thread the bolts into the square nuts. Once both bolts are tight, install the very small screw in the top of the assembly. Then repeat the process for the other A-pillar assembly as well. Since our kit came with eight round LEDs we're going to put four round LEDs on each A-pillar, so we're going to install four square nuts. Then a bolt and bracket for each square nut. Then you're going to tighten this bottom one just so it doesn't fall off when you go to install it. Then repeat the same process for the other A-pillar. With the A-pillars assembled we're going to install the six light brackets into the main light bar using 12 square nuts and bolts. Install a half round washer on each side of the bracket, then put your longer bolts through each washer. Then thread them into the square nuts.

We're going to place these brackets so they're facing away from each other so that way when the light bar is in between the brackets it's going to be easier to tighten these bolts rather than being in the middle. While we're still at the table we're going to go ahead and install the light bars on the main bracket. Once you get all three lights installed you can get it centered or set it up however you would like. Then tighten the two outside brackets. Then you can do the middle ones. We're going to mount the A-pillar brackets. To do so remove these two T40 Torx bolts right here on the A-pillar. Don't tighten these bolts all the way just yet. You might need some adjustment with you go to install the main bar. We're now going to assemble the round lights we're going to put on the A-pillar. Now it's ready to go on the A-pillar. Put the washer on the bolt, then the lock washer, and then the nut.

Because there's four lights on this A-pillar there's a lot of wires running down this bracket, so we had to the conduit off. If you wanted to keep it on you would probably have to cut these connectors off. We're not going to do that. We're just going to wire it up just like this and then hook it up to our Trail Rocker system. You're probably going to want a friend for this, but now it's time to install the main bar onto the A-pillars. For added strength I'm going to put a square right behind this bracket. Then install a bolt right here. As you can see, there's a lot of lights and a lot of wires. This kit does come with an A-pillar switch pod which you can wire everything up to. We're not going to install this in this video though because we already have a separate video on how to install it. We're going to hook our wires up to our Trail Rocker system but you can wire it up any way you would like.

Here I am. I'm about eight feet away from our jeep and about feet away from the wall. Looking at this thing it's like I'm looking into the sun. These sunglasses aren't doing anything. This is incredibly bright. You'll light up the entire trail when you're out off-roading. This thing will really, really help when you're off-road. Our Rugged Ridge Elite Fast Track Windshield Light Bar is installed. If you're looking for that one thing that will light up the entire trail, this is it. This thing is incredibly bright. Installation is going to take you a couple of hours so give yourself some time for the wiring. Before you know it you'll be heading off-road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.