Rugged Ridge X-Clamp Textured Black With 3-1/2" Round LED Light For 2-1/4"-3" Round Bar Pair

Rugged Ridge:
15210.94
MSRP $158.88
$125.99
You save 21%

Pair of Rugged Ridge Textured Black X-Clamps with Two 3-1/2" Round LED Lights for 2-1/4" to 3" Round Bars.

This innovative and versatile Pair of Textured Black X-Clamps with Two 3-1/2" Round LED Lights for 2-1/4" to 3" Round Bars from Rugged Ridge will illuminate the off-road trails in style. This durable, bright and energy efficient LED light and clamp kit is a creative way to enhance your ride!

Features and Benefits of the Rugged Ridge Textured Black X-Clamps for 2-1/4" to 3" Round Bars:
- Fits all 2-1/4" to 3" round bars
- Made out of durable die-cast aluminum
- Rugged and stylish textured black powder-coated finish
- Offers superior mounting versatility
- Utilizes patented Pivotal Fit Technology
- Mounts lights, cameras, antennas, etc.
- Comes with stainless steel hardware
- Simple and straightforward installation

The patent pending Rugged Ridge X-Clamp Mounting System (15210.94) is crafted from high-grade die-cast aluminum with a black textured finish. Designed to be extremely adaptable, this X-Clamp system is a creative way to mount auxiliary lighting or other accessories to any 2-1/4" to 3" tubing.

Features and Benefits of the Rugged Ridge 3-1/2" Round LED Light:
- Emits bright LED light
- Energy efficient
- Driving beam pattern
- 1040 lumens (2080 total)
- 18-watt
- Waterproof design
- 30,000-hour lifespan

The clamps are simple to install and include stainless steel hardware. They utilize state-of-the-art Pivotal Fit Technology and can be installed by rotating them to fit the tube diameter, pivoting the mounting bracket to the desired position and adding the preferred accessory. No other clamps on the market will give you a perfect fit on such a range of tube sizes!

Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.

Order this Pair of Rugged Ridge 15210.94 Textured Black X-Clamps with Two 3-1/2" Round LED Lights for 2-1/4" to 3" Round Bars from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

When going off-roading, you can never have too much visibility, and as you can see with our 2016 Jeep Wrangler, we've added a ton of LED upgrades, but I think there's room for just a little bit more. Today, we're going to be installing a set of these Rugged Ridge X Clamps with Round LED Lights.

These Rugged Ridge X Clamps are made of heavy duty die cast aluminum, and they're designed to fit two and a quarter to three inch roll bars, to mount cameras, lights and antennas. They come with two super bright LED round lights, rated at 1040 lumens, and today we're going to install them on our 2016 Jeep Wrangler.

You can mount these clamps anywhere you have a two and a quarter to three inch bar, but we're going to put ours right here on the rear roll bar. Just place the clamp around the bar, and then tighten all four bolts. Make sure you get all four started before you start tightening them down. You want to make sure they're tightened evenly so you don't cross thread. If you run into a situation like this where you have the bolts tightened all the way, but it's still loose on the bar, remove those bolts, and install the shorter ones, and that'll make it nice and tight.

Grab the mounting bracket that attaches to the clamp, and as you can see, there's four studs right here that allows you to attach this in four different locations. Choose the location that you want, then install the screw. Place the light on the bracket, install the bolt, then tighten it down with a 13 millimeter socket and wrench. And now we can install the other light.

So we've got both of our Rugged Ridge lights and X clamps installed, the clamps definitely make it a lot easier installing lights on the roll bars, especially if you have a Jeep or a truck. Installation's not too bad, it should only take you about 15 minutes, and before you know it, you'll be heading off road.

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-150 years:

This product will fit the following Gladiator years:

  • 2020,
  • 2021,

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.