Scott Drake Door Hinge Pin And Bushing 2-1/2" Kit 1965-1968

CJ's Part Number:
HW2948
Scott Drake Door Hinge Pin And Bushing 2-1/2" Kit 1965-1968 is rated 4.5 out of 5 by 6.
  • y_2019, m_11, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3-b1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_HW2948, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 148.86ms
  • REVIEWS, PRODUCT

Highlights

  • Fits 1965-1968 Mustangs
  • 2-1/2" Door Hinge Pins
  • Includes Brass Bushings
  • Complete Kit
$22.99

Scott Drake 2-1/2" Door Hinge Pin and Bushing Kit for all 1965-1968 Mustangs.

Keep your door hinges in working order with Scott Drakes door pin and bushing kit. The 2-1/2" door pins are machined like originals and are the correct length. Door hinge bushings are machined brass to match factory specs.

Kit Includes:
- 4 Door Hinge Pins
- 8 Door Hinge Bushings

*Kit contains enough hardware for one car.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Great easy fit I have made several purchases from CJ pony parts and have been very pleased with each one.
Date published: 2015-12-11
Rated 5 out of 5 by from Works great Pins and bushings fit like o.e.m., easy to replace.
Date published: 2015-11-17
Rated 3 out of 5 by from Tight fit but week bushings on the fourth hinge just starting to drive the pin through the top bushing and the bushing broke from the lip of the bushing off and I hadnt even started hitting the pin very hard on top of the pin. Makes me wonder how long the bushings in the other three hinges will hold up. Especially knowing the involvement to remove a fender again later.
Date published: 2019-02-24
Rated 5 out of 5 by from Great value The doors were drooping when the doors were opened so I knew I had to do something. I removed the hinges. The pins I pushed out with a hydraulic press and the bushings I tapped out with a hammer and punch. Reassembly was straightforward, but the lower hinges were totally worn, so I replaced them with new hinges.
Date published: 2018-11-30
Rated 5 out of 5 by from Good quality The pins were a little bit smaller, but I think it was because my door hinges were loosy
Date published: 2017-04-17
Rated 4 out of 5 by from Careful Careful when putting these on the copper fittings are thin.
Date published: 2019-01-07
  • y_2019, m_11, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3-b1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_HW2948, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 17.79ms
  • REVIEWS, PRODUCT

Will this part fit a 1970 model year?

Asked by: longlakehouse1
No.
Answered by: CJPP Dave
Date published: 2019-03-31

Can the pins and bushings be installed on mounted hinges without removing doors and fenders?

Asked by: Flyslow
The hinges would have to be removed from the car to change the pins and bushings, you can gain access to some of the bolts after removing the rear splash shield.
Answered by: rk cjpp
Date published: 2017-01-27

Hi,will this kit fit the hinges on my 1968 mustang. i am being told by others that the hinges changed in 1968,just want to make sure before i buy thanks

Asked by: Gtstang
This will fit your 1968 without issue.
Answered by: CJ Pony Parts
Date published: 2018-02-26
  • y_2019, m_11, d_20, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3-b1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_HW2948, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 140.67ms
  • QUESTIONS, PRODUCT