Scott Drake Front Disc Brake Conversion Kit With Power Dual Bowl Master Cylinder/ 4-Piston Calipers Mustang Automatic Transmission V8 1965-1966

Scott Drake:
DBC-A120-P-R
Rating:
81% of 100

Highlights

  • Power Dual Bowl Master
  • Bolt-On Installation
  • Uses V8 Drum Brake Spindles
  • 4-Piston Calipers
MSRP $1,135.95
$1,022.36
You save 10%

Scott Drake Front Disc Brake Conversion Kit with a Power Dual Bowl Master Cylinder and 4-Piston Calipers for 1965-1966 V8 Mustangs with an Automatic Transmission.

Are you looking for an easy way to convert your 1965-1966 Mustang's manual front drum brakes to safer and more reliable front power disc brakes? This Scott Drake DBC-A120-P-R Front Disc Brake Conversion Kit comes with a Power Dual Bowl Master Cylinder and 4-Piston Calipers, and it's a simple way to upgrade your V8 Mustang to safer and more reliable front power disc brakes. You'll get everything you need to convert them to factory-style 4-piston front power disc brakes using your original V8 drum brake spindles.

Features and Benefits:
- Easy Way to Upgrade to Safer and More Reliable Front Power Disc Brakes
- Comes with All You Need to Convert to Factory-Style 4-Piston Front Power Disc Brakes
- Uses the Original V8 Drum Brake Spindles
- All-New Kit Components
- Maintains Factory Look
- Bolt-On Installation: No Cutting, Drilling or Welding

These all-new kit components will help you maintain your factory look, but the end result will be a Pony that brakes faster, better and safer than it used to. Installing these new front power disc brakes will be a simple bolt-on installation that won't require any cutting, drilling or welding on your part.

This Kit Includes:
- Zinc-Plated 4-Piston Calipers with Stainless Steel Pistons
- Adjustable Proportioning Valve
- Brake Booster
- Dual Reservoir Master Cylinder
- Pre-Bent Brake Lines
- Hardware

Please Note: Minimum wheel size: 14" x 7". For 1965-1966 V8 Mustangs with an automatic transmission only.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We’re here with this power disc brake conversion kit fitting your 1965 through 1966 Mustang with automatic transmission from Scott Drake. This power disc brake conversion kit from Scott Drake can provide everything necessarily to convert your 1965 through 1966 Mustang with manual drum brakes and an automatic transmission into a power disc brake setup. It includes a power brake booster with a dual bore master cylinder conversion along with the lines and a distribution block and proportioning valve and four piston calipers that’re loaded with pads. It also comes with a set of rotors that will work with these stock style spindles and includes all new hubs, seals, bearings and dust shields. New brake lines and all hardware for installation are also included. Again, this power disc brake conversion is only designed to work with an automatic or manual trans converted to a cable. This will require the use of at least a 14x7 inch wheel for proper clearance.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.