Scott Drake Fuel Tank Installation Kit With 3/8" Fuel Sending Unit Mustang 1965-1968

Scott Drake:
C5ZZ-9002-8MIK
Rating:
84% of 100

Highlights

  • 3/8" Fuel Tank Sending Unit
  • 4" Fuel Tank Filler Hose
  • Fuel Tank Mounting Hw Kit
  • Filler Pipe To Body Gasket
MSRP $61.95
$55.76
You save 10%

Scott Drake Fuel Tank Installation Kit with a 3/8" Fuel Sending Unit for 1965, 1966, 1967 and 1968 Mustangs.

Make sure your fuel tank, whether brand new or refurbished, is properly mounted on your 1965-1968 Mustang by ordering this Fuel Tank Installation Kit with a 3/8" Fuel Sending Unit from Scott Drake. The highlight of this kit from Scott Drake is the 3/8" fuel tank sending unit that will make sure your fuel gauge is reading accurately, so you won't have to worry about randomly getting stuck on the side of the rode. This unit includes a 3/8" hose fitting and a new gasket, it will mount to the fuel tank in your classic Mustang. Scott Drake makes sure that this fuel tank sending unit is properly inspected to make sure you'll have an easier installation. Also included is an o-ring to make sure this unit is correctly sealed.

Features and Benefits:
- 3/8" Fuel Tank Sending Unit
- Hose Fitting and Gasket Included
- Secure O-Ring Seal
- Fuel Resistant Rubber Pipe Construction

The fuel filler pipe hose is 4 inches in length and manufactured from a fuel resistant rubber. It is easily installed and will connect the filler pipe to your fuel tank. This is the standard replacement that is used and is incredibly durable within your fuel system. Scott Drake also throws in a fuel filler pipe to body gasket that is made from fuel resistant cork. This is what sits on the end of your filler pipe and meets with your gas cap. Installing this to your fuel assembly will prohibit any fuel spills or water from getting into the trunk area from the filler tube.

This installation kit also comes with the proper hardware that you will need including the mounting hardware for your fuel tank which has eleven cadmium plated sheet metal screws, one black oxide captive washer bolt and a 'J' plate nut. The other pieces of hardware are a set of special sheet metal screws that are used to attach the filler tube to your tail lamp panel.

Included:
- 3/8" Fuel Tank Sending Unit
- 4" Fuel Tank Filler Hose
- Fuel Tank Mounting Hardware Kit
- Fuel Filler Pipe To Body Cork Gasket
- Set of Fuel Tank Filler Screws

Tech Tip: If you decide to install two gaskets on your filler pipe, it will be beneficial to move the gas cap away from the tail light panel. Doing this will help keep your gas cap from scratching your Mustang when it's twisted during opening.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We’re here, with Scott Drakes fuel tank instillation kit with setting unit fitting your 1965 through 1968 Mustang.

Whether refurbishing your original tank or installing a brand new one, this Scott Drake instillation kit is going to give you the main parts you need for a proper instillation.

It starts off with their fuel sending unit, which replaces the stock piece, and has a 3/8 fitting with much more consistent gauge reading. Includes the necessary O ring for instillation, a fuel filler hose to go to the filler neck, a new gasket for the filler neck, and all the hardware necessary to install the tank.

If you're ordering a new tank for you '65 through '68 Mustang, ordering the Scott Drake instillation kit is going to make your install go a lot easier.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart