Scott Drake Fuel Tank Installation Kit With 5/16" Fuel Sending Unit Mustang 1965-1967

Scott Drake:
C5ZZ-9002-5MIK
Rating:
69% of 100

Highlights

  • 5/16" Fuel Tank Sending Unit
  • 4" Fuel Tank Filler Hose
  • Fuel Tank Mounting Hw Kit
  • Filler Pipe-Body Cork Gasket
MSRP $60.95
$54.86
You save 10%

Scott Drake Fuel Tank Installation Kit with a 5/16" Fuel Sending Unit for 1965, 1966 and 1967 Mustangs.

If you’re refurbishing or purchasing a new fuel tank it’s a great idea to replace your mismatch fuel tank hardware, components and replace it with this high quality Fuel Tank Installation Kit with a 5/16" Fuel Sending Unit  C5ZZ-9002-5MIK from Scott Drake. This convenient kit can easily be installed on any 1965-1967 Mustang which will help freshly tighten up your fuel tank assembly.

Features and Benefits:
- 5-1/16" Fuel Sending unit
- Secure O-Ring Seal
- Fuel Resistant Rubber Hose Construction
- Direct-Fit Replacement
- Prevents Fuel Spills

The star of this kit is a 5/16" fuel tank sending unit from Scott Drake which will make sure your fuel gauge is reading correctly, so you won't have to worry about getting stuck on the side of the road when you least expect it. Included is a 5/16" hose fitting and a new gasket that mounts to the fuel tank in your first generation Mustang. Scott Drake ensures a secure installation with the simple O-ring addition.

Four inches in length, the fuel filler pipe hose is manufactured of a fuel resistant rubber and connects the filler pipe to your fuel tank. This is the standard replacement that is used and is incredibly durable within your fuel system. A fuel filler pipe-to-body gasket is made of cork to protect the exterior paint and also prohibit fuel spills or water entering the trunk area from the filler tube.

This installation kit from Scott Drake also comes with the proper hardware that you will need including the mounting hardware for your fuel tank which has eleven cadmium plated sheet metal screws, one black oxide captive washer bolt and a 'U' nut. The other pieces of hardware are a set of special sheet metal screws that are used to attach the filler tube to your tail lamp panel.

Kit Includes:
- 5/16" Fuel Tank Sending Unit
- 4" Fuel Tank Filler Hose
- Fuel Tank Mounting Hardware Kit
- Fuel Filler Pipe To Body Cork Gasket
- Set of Fuel Tank Filler Screws

Tech Tip: If you decide to install two gaskets on your filler pipe, it will be beneficial to move the gas cap away from the tail light panel. Doing this will help keep your gas cap from damaging your paint when it's twisted on and off your Mustang.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We’re here with a fuel tank installation kit, fitting your 1965 through 1967 Mustang from Scott Drake.

If you're replacing the fuel tank in your ‘65 through ‘67 Mustang, this kit from Scott Drake is going to provide everything necessary for installation. It's going to include a brand new sending unit with a 516 fitting. A four inch fuel hose, O-ring, all necessary hardware, as well as a new gasket. The installation kit is going to include a single filler pipe gasket. As always, we do recommend using two of these, if you want to pull the gas cap further away from your painted taillight panel, so you don't damage it when removing the cap.

If you're replacing the fuel tank on your 65 through 67 Mustang, it's a great idea to pick of one of the these install kits from Scott Drake.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.