Scott Drake Steering Coupler Assembly 1967-1970

Scott Drake: C7OZ-3A525-A
CJ's Low Price:
$24.95
1508544000 62873
Make sure to pick up the other steering hardware you may need for your classic Mustang.
CJ's Low Price:
$19.99
Qty
CJ's Low Price:
$19.99
Qty
Earn 24 RPM Points What's this?
Scott Drake Steering Coupler Assembly 1967-1970
Scott Drake Steering Coupler Assembly 1967-1970 Scott Drake Steering Coupler Assembly 1967-1970 Scott Drake Steering Coupler Assembly 1967-1970 Scott Drake Steering Coupler Assembly 1967-1970 Scott Drake Steering Coupler Assembly 1967-1970 Play Scott Drake Steering Coupler Assembly 1967-1970 Video 1 Play Scott Drake Steering Coupler Assembly 1967-1970 Video 2
Scott Drake

Product Description

Scott Drake Steering Coupler Assembly for all 1967, 1968, 1969 and 1970 Mustangs.

Replace the old and worn out steering coupler in your 1967-1970 Mustang by ordering this Scott Drake Steering Coupler Assembly. Scott Drake's C7OZ-3A525-A steering coupler is a premium reproduction of the original with an improved performance to last for plenty of years to come.

Features & Benefits:
- Authentic OE Appearance
- Direct Fit Replacement
- Pre-Assembled
- Increased Durability
- Includes Corrosion Resistant & Phosphate Coated Cast Components
- Stronger Rivets
- Reinforced Rubber Isolator of Correct Thickness
- Comes with Standard Hardware & Lock Nuts

This steering coupler comes pre-assembled to be a direct fit replacement for in your classic Mustang to save you time and trouble. It will provide an increased level of performance and overall durability, while still maintaining an authentic OEM appearance. This steering coupler assembly comes with a variety of corrosion resistant, phosphate coated cast components includes stronger rivets, lock nuts and the standard hardware you'll need. Scott Drake also provides a reinforced rubber isolator that has the proper thickness to work perfectly in your vintage Pony.

Scott Drake has become an iconic brand that redefines quality for reproduction and aftermarket Mustang parts for 1965 to 1970 Mustangs. One of Scott Drake’s trademarks is his attention to detail. If Scott Drake does make a change in one of their classic reproduction parts, that change is often an improvement for owners, making the part of even higher quality than the original.

Go ahead and purchase Scott Drake's C7OZ-3A525-A Steering Coupler Assembly for your 1967, 1968, 1969 or 1970 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Steering Boxes  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Scott Drake Steering Coupler Assembly 1967-1970 is rated 3.5 out of 5 by 8.
Rated 1 out of 5 by from Poor Casting & Pinning The two fixed pins were installed as such that they would not fit over the column adapter. Was suggested to "hog or bend" it out but declined in favor of a replacement. Replacement was fine.
Date published: 2016-04-15
Rated 5 out of 5 by from Perfect replacement This rag joint is great. I continue to count on Scott Drake parts as I restore my 70 Mach 1.
Date published: 2016-07-02
Rated 3 out of 5 by from Good Quality, Poor Fit As with many parts I have bought over the years for my Mustang this was close to being correct but did not fit without me modifying it a bit. I had to grind down the metal near where the bolt head sticks out so that the socket had room to fit over the bolt head. The materials used for the coupler seem to be good quality.
Date published: 2017-07-24
Rated 5 out of 5 by from Exact replica of original Everything fit and lined up perfectly. The only tricky part of installation was that you have to completely remove the screw to slide it onto the splined gear box, then when it's halfway on, you start the screw before sliding it the rest of the way on and tightening it down.
Date published: 2017-08-23
Rated 4 out of 5 by from Good part, well made I purchased this coupler for my 73 mustang. Unfortunately I had to modify it because it doesn't work on a car with factory tilt. However, the part was able to be used and work for my purpose
Date published: 2017-07-15
Rated 4 out of 5 by from Good Parts The steering coupler I ordered was exactly right. It looked and fit just like the original except it wasn't worn out. I am glad I ordered it from CJ Pony Parts.
Date published: 2016-04-22
Rated 5 out of 5 by from I've been looking for this part for a long time! a outstanding copy of original steering coupler. Very pleased with appearance and craftsmanship.
Date published: 2017-06-08
Rated 1 out of 5 by from Did not fit! Advertised this coupler fits 1973 Mustangs. It does not.
Date published: 2017-07-29
  • y_2017, m_10, d_20, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_HW3431, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 8.54ms
  • REVIEWS, PRODUCT

Product Questions

Is this steering coupler also available for 1970 Ford Mustang if so how much and from whom?

Asked by: Ctook
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2017-10-06

will this work on my 1979 mercury capri. Or do you carry this rag joint for the 79

Asked by: patj
We do not offer a rag joint for your application.
Answered by: rk cjpp
Date published: 2016-11-17

Can I use this item to a Mustang 1965

Asked by: Boricua514
No.
Answered by: CJPP Dave
Date published: 2016-10-05
  • y_2017, m_10, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_HW3431, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.33ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

Scott Drake Steering Coupler Assembly 1967-1970 Video Transcript
By Bill Tumas: We’re here with a replacement steering coupler fitting your 1967 through 1973 Mustang from Scott Drake. If the steering is getting loose and vague on your 1967 through 1973 Mustang, many times the steering coupler needs to be replaced. The factory coupler uses rubber and then rivets to hold it in place, but over time it can wear out, it can dry rot, and get very, very loose and cause very vague, almost dangerous steering. This Scott Drake piece looks just like the original, but uses a much larger, stronger rivet and a much heavier duty rubber, so it'll last a lot longer than the factory one. This Scott Drake steering coupler includes all the necessary hardware for installation and will be a direct replacement for the original.