Sequential Taillight Kit Shelby 1967-1969/California Special 1967-1968

CJ's Part Number:
TLLED32
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 149.56ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Sequential Taillights
  • Fits Cali Special/ Shelby
  • Direct-Fit
  • Easy Installation
$298.99

Sequential Taillight Kit for 1967-1969 Shelby Mustangs and 1967-1968 California Special Mustangs.

Upgrade the look and brightness of your Mustang's taillights with this sequential taillight kit! A microprocessor is integrated in the bulb base. These new bulbs fit in the existing socket just like the original. This kit is ideal for a conversion from standard incandescent lights to LED sequential operation using cougar or Thunderbird taillight housings.

Tailight Kit Features:
- Bright LED Lights
- Complete Kit
- Sequential Taillight Function
- Fits 1967-1969 Mustangs with Shelby or California Special Taillights

Please Note: This kit works as long as you are not using any of the original Ford Thunderbird or Cougar Style Sequential Taillight relays and motors. Most Shelbys and Cougars have been converted from these old mechanical systems so that all lights on a side flash on/off during turn signaling. Also, they must be flashed by a single flasher under the dash.

OTHER APPLICATIONS
Fits 1964-1965 Ford Thunderbird
Fits 1967-1968 Mercury Cougar

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 40.75ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Hello, does this unit replace the original flasher unit that is located under the dash? Or does it install in the trunk near the tail lights? Do you have an instruction sheet that you can send me? Thank you.

Asked by: sporter
This replaces the flasher under the dash.
Answered by: rk cjpp
Date published: 2019-09-23

Hi , I have a Led  SD. -6004- UB 67-8  sequential t/lamp kit .my problem is sequential ( flasher ) has failed ! Where can I get a new unet. I have looked all over can you advise me ED thanks 

Asked by: Ed martin
Sorry we do not offer the flasher separate from the kits we offer.
Answered by: rk cjpp
Date published: 2019-04-10

But do you have to switch to led in the front blinker also or does the old works together with this?

Asked by: Magnus
You do not have to switch the front to led.
Answered by: rk cjpp
Date published: 2018-10-23

hey does this do the brake sequential as well or only turn signals

Asked by: dsmdevil
I believe the sequence one when applying the brakes.
Answered by: rk cjpp
Date published: 2018-08-28

It shows it will fit a 1964-1965 Mercury Cougar.  Should that be a 1967-1968 Mercury Cougar instead (67 was the first year for Cougar)?  If so, does this set replace the original bulbs as well as the relay?

Asked by: Infostop1
This kit works as long as you are not using any of the original Ford Thunderbird or Cougar style sequential taillight relays and motors. Most Shelbys and Cougars have been converted from these old mechanical systems so that all lights on a side flash on/off during turn signaling. Also, they must be flashed by a single flasher under the dash.
Answered by: rk cjpp
Date published: 2018-05-16

Hello. Just to make sure that this set up on my 1967 mustang shelby lights that one bulb will light at one time when using the sequential set up? One then another then another. Thank you

Asked by: Jayflight68
Yes, that's how it works.
Answered by: CJ Pony Parts
Date published: 2015-03-19
  • y_2020, m_1, d_22, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_TLLED32, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 114.58ms
  • QUESTIONS, PRODUCT
Complete Your Package
Add to Cart