Shift Knob 2-1/8" Rally II With Ford Racing Logo Fiesta ST 2014-2017/Focus ST 2013-2017/Mustang 2005-2017
Rally II 2-1/8" Shift Knob with a Ford Racing Logo for all 2014, 2015, 2016 and 2017 Fiesta STs, 2013, 2014, 2015, 2016 and 2017 Focus STs, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 and 2017 5-Speed and 6-Speed Mustangs and 2007, 2008 and 2009 Shelby GT500s.
Give the interior of your 2014-2017 Fiesta ST, 2013-2017 Focus ST, 2005-2017 5-Speed and 6-Speed Mustang and 2007-2009 Shelby GT500 the perfect touch of style with this new rally II 2-1/8” manual shift knob featuring a Ford Racing logo from CJ Pony Parts! These race-inspired shift knobs are designed with bold colors and rally II style stripes in a high gloss finish to give your vehicle a custom look that all car fanatics are after.
Features and Benefits:
- Available in a Multitude of Color Options
- Inlaid Rally II Style Stripes
- Ford Racing Logo Etched On Top of Shift Knob
- Made Using Premium Partek Resins
- Engineered for Strength and Durability
- 2-1/8” Diameter and 12mm x 1.25 Thread Pattern
- Manufactured in the USA
What are rally II style stripes? Rally II stripes consist of three separate stripes; two small outer stripes surrounding a wide inner stripe. For this specific shift knob, the Ford Racing logo divides the rally II racing stripes which run vertically around the shift knob.
These American-made manual shift knobs are made using the same high-quality partek resins found in billiard balls, and are engineered for long-term strength and durability. Choose from a variety of stripe and color combinations that suit your individual taste. Color options are listed by knob color, then stripe and logo color. The Ford Racing logo on the top of the knob is the same color as the stripes. All rally engravings are inlaid, polished smooth to the touch and guaranteed to last a life time.
*All knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.
*Does NOT fit 2010-2014 GT500s, which have a 10mm x 1.25 thread pattern.
Please Note: This manual shift knob does not include a jam nut. However, a jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended instead of a jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer you run the risk of splitting the shift knob in half if you over tighten knob when it bottoms out on the shift handle.
Please Note: For 2014-2017 Fiesta STs, 2013-2017 Focus STs and 2015-2017 Mustangs the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.
Order a Rally II 2-1/8" Shift Knob with a Ford Racing Logo for all 2014, 2015, 2016 or 2017 Fiesta STs, 2013, 2014, 2015, 2016 or 2017 Focus STs, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 and 2017 5-Speed and 6-Speed Mustangs and 2007, 2008 and 2009 Shelby GT500s from CJ Pony Parts today!