Rally II 2-1/8" Shift Knob with a Ford Racing Logo for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs, 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs, 2016, 2017 and 2018 Focus RSs and 2014, 2015, 2016, 2017, 2018 and 2019 Fiesta STs.
Give the interior of your 2014-2019 Fiesta ST, 2013-2018 Focus ST, 2005-2020 5-Speed and 6-Speed Mustang and 2007-2009 Shelby GT500 the perfect touch of style with this new rally II 2-1/8” manual shift knob featuring a Ford Racing logo from CJ Pony Parts! These race-inspired shift knobs are designed with bold colors and rally II style stripes in a high gloss finish to give your vehicle a custom look that all car fanatics are after.
Features and Benefits: - Available in a Multitude of Color Options - Inlaid Rally II Style Stripes - Ford Racing Logo Etched On Top of Shift Knob - Made Using Premium Partek Resins - Engineered for Strength and Durability - 2-1/8” Diameter and 12mm x 1.25 Thread Pattern - Manufactured in the USA
Vehicle Fitment: - 2005-2017 Mustang V6 - 2015-2020 Mustang EcoBoost - 2005-2020 Mustang GT - 2012-2013 Mustang Boss 302 - 2007-2009 Shelby GT500 - 2014-2019 Fiesta ST - 2013-2018 Focus ST - 2016-2018 Focus RS *This Shift Knob is NOT designed for use with 2010-2014 Shelby GT500’s or 2015-2020 Shelby GT350 and GT350R Mustangs.
What are rally II style stripes? Rally II stripes consist of three separate stripes; two small outer stripes surrounding a wide inner stripe. For this specific shift knob, the Ford Racing logo divides the rally II racing stripes which run vertically around the shift knob.
These American-made manual shift knobs are made using the same high-quality partek resins found in billiard balls, and are engineered for long-term strength and durability. Choose from a variety of stripe and color combinations that suit your individual taste. Color options are listed by knob color, then stripe and logo color. The Ford Racing logo on the top of the knob is the same color as the stripes. All rally engravings are inlaid, polished smooth to the touch and guaranteed to last a life time.
Additional Notes: - This manual shift knob does not include a jam nut. However, a jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended instead of a jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer you run the risk of splitting the shift knob in half if you over tighten knob when it bottoms out on the shift handle. - For 2015-2020 Mustangs, 2014-2019 Fiesta STs, 2013-2018 Focus STs and 2016-2018 Focus RSs; the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.
*All knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts. *Does NOT fit 2010-2014 GT500s, which have a 10mm x 1.25 thread pattern.