Shift Knob 2-1/8" Rally II With Shift Pattern And Cobra Logos 6-Speed GT500 2007-2009
Rally II 2-1/8" Shift Knob with a 6-Speed Shift Pattern And Cobra Logos for all 2007, 2008 and 2009 Shelby GT500 Mustangs with a Manual Transmission.
This all new rally II 2-1/8” manual shift knob is the perfect way to add some muscle car styling to the interior of your 2007-2009 Shelby GT500 Mustang. This shift knob is designed with a 6-speed shift pattern and Cobra logos exclusively from CJ Pony Parts!
Features and Benefits:
- Available in a Combination of Color Options
- Inlaid Rally II Style Stripes
- Correct 6-Speed Shift Pattern (Reverse to the Right and Up)
- Etched Cobra Logos on Both Sides of Knob
- Manufactured Using Premium Partek Resins
- Engineered for Strength and Durability
- 2-1/8” Diameter and 12mm x 1.25 Thread Pattern
- Made in the USA
What are rally II style stripes? Rally II stripes consist of three separate stripes; two small outer stripes surrounding a wide inner stripe. For this specific knob, the rally II stripes run vertically around the shift knob split by the 6-speed shift pattern which is located on top of the knob. The Cobra logos are located on the driver and passenger side of the knob once properly aligned.
These American-made manual shift knobs are manufactured using the same high-quality partek resins found in world class billiard balls, and are engineered for long-term strength and durability. Choose from a variety of stripe and color combinations that suit your individual taste. Color options are listed by knob color, then stripe color. The rally II stripes and Cobra logos are the same color as the shift pattern and are inlaid, polished smooth to the touch.
This custom shift knob features a 2-1/8" diameter and the correct 12mm x 1.25 thread pattern for your 2007-2009 Shelby GT500 Mustang.
*All knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.
Please Note: This manual shift knob does not include a jam nut. However, a jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended instead of a jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer you run the risk of splitting the shift knob in half if you over tighten knob when it bottoms out on the shift handle.
Order a Rally II 2-1/8" Shift Knob with a 6-Speed Shift Pattern and Cobra Logos for your 2007, 2008 or 2009 Shelby GT500 Mustang with a Manual Transmission from CJ Pony Parts today!