Shift Knob 2-1/8" Rally II With Shift Pattern And GT Logos 5-Speed GT 2005-2010
Rally II 2-1/8" Shift Knob with a 5-Speed Shift Pattern and GT Logos for all 2005, 2006, 2007, 2008, 2009 and 2010 GT Mustangs with a Manual Transmission.
When the dull, stock shift knob in your 2005-2010 GT Mustang just isn’t cutting it anymore, you can pick up the new rally II 2-1/8” manual shift knob featuring a 5-speed shift pattern and GT logos from CJ Pony Parts!
Features and Benefits:
- Available in a Wide Variety of Color Options
- Inlaid Rally II Style Stripes
- Correct 5-Speed Shift Pattern (Reverse On Bottom Right)
- GT Logo Etched On Each Side of Shift Knob
- Manufactured Using Premium Partek Resins
- Engineered for Strength and Durability
- 2-1/8” Diameter and 12mm x 1.25 Thread Pattern
- Made in the USA
What are rally II style stripes? Rally II stripes consist of three separate stripes; two small outer stripes surrounding a wide inner stripe. For this specific shift knob, the rally II stripes run vertically around the knob with a break at the top for the 5-speed shift pattern. The GT logos are located on the driver and passenger side of the shift knob once properly aligned.
These American-made manual shift knobs are manufactured using the same high-quality partek resins found in world class billiard balls, and are engineered for long-term strength and durability. Choose from a variety of stripe and color combinations that suit your individual taste. Color options are listed by knob color, then stripe color. The shift pattern and GT logos are the same color as the stripes and are inlaid, polished smooth to the touch.
This custom shift knob features a 2-1/8" diameter and the correct 12mm x 1.25 thread pattern for your 2005-2010 GT Mustang with a manual transmission.
*All knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.
Please Note: This manual shift knob does not include a jam nut. However, a jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended instead of a jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer you run the risk of splitting the shift knob in half if you over tighten knob when it bottoms out on the shift handle.
Order a Rally II 2-1/8" Shift Knob with a 5-Speed Shift Pattern and GT Logos for your 2005, 2006, 2007, 2008, 2009 or 2010 GT Mustang with a Manual Transmission from CJ Pony Parts today!