Shift Knob 2-1/8" Rally III With Shift Pattern 6-Speed And Ford Racing Logo Mustang 2011-2020/ Focus ST 2013-2018/ Fiesta ST 2014-2019

CJ's Part Number:
MSK400-V
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 132.32ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
From
$74.99

Rally III 2-1/8" Shift Knob with a 6-Speed Shift Pattern and Ford Racing Logo for 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs, 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs, 2014, 2015 and 2016 Focus RSs and 2014, 2015, 2016, 2017, 2018 and 2019 Fiesta STs.

If you’re looking to switch up the factory shift knob in your 2011-2020 Mustang, 2013-2018 Focus or 2014-2019 Fiesta then add the perfect touch of color to your interior with this new rally III 2-1/8” shift knob featuring a 6-speed shift pattern and Ford Racing logo! These race-inspired shift knobs are designed with bold colors and rally III style stripes in a high gloss finish that give your Mustang’s interior the classic, yet custom look that all enthusiasts are after.

Features and Benefits:
- Available in an Assortment of Colors
- Correct 6-Speed Shift Pattern (Reverse to the Left and Up)
- Inlaid Rally III Style Stripes
- Etched Ford Racing Logo
- Made Using High Quality Partek Resins
- Engineered for Strength and Durability
- 2-1/8” Diameter and 12mm x 1.25 Thread Pattern
- Made in the USA

Vehicle Fitment:
- 2011-2017 Mustang V6
- 2015-2020 Mustang EcoBoost
- 2011-2020 Mustang GT
- 2012-2013 Mustang Boss 302
- 2014-2019 Fiesta ST
- 2013-2018 Focus ST
- 2016-2018 Focus RS
*This Shift Knob is NOT designed for use with 2011-2014 Shelby GT500’s or 2015-2020 Shelby GT350 and GT350R Mustangs.

What are rally III style stripes? Rally III stripes consist of three separate stripes; two small outer stripes surrounding a wide inner stripe. These stripes run horizontally on the driver and passenger side of the shift knob to simulate rocker stripes. With this specific knob, the Ford Racing Logo is located on the rear of the shift knob, facing the back of the car once properly aligned.

These American-made manual shift knobs are made using the same high-quality partek resins found in world-class billiard balls, and are engineered for long-term strength and durability. Choose from a variety of stripe and color combinations that suit your individual taste. Color options are listed by knob color, then stripe color. The Ford Racing logo on the rear of the knob is the same color as the rally stripes and shift pattern. The rally stripes, logo engraving and shift pattern are all inlaid, polished smooth to the touch and guaranteed to last a life time.

Additional Notes:
- This manual shift knob does not include a jam nut. However, a jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended instead of a jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer you run the risk of splitting the shift knob in half if you over tighten knob when it bottoms out on the shift handle.
- For 2015-2020 Mustangs, 2014-2019 Fiesta STs, 2013-2018 Focus STs and 2016-2018 Focus RSs; the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.

*All knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.22ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 154.59ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;