Give the interior of your 2005-2020 Mustang the perfect touch of style with this new rally 2-1/8” manual shift knob featuring a Cobra logo from CJ Pony Parts! These race-inspired shift knobs are designed with eye-catching colors and rally style stripes in a high gloss finish to give your ‘Stang the classic, yet custom look that all Mustang fanatics are after.
Features and Benefits:
- Available in a Variety of Color Options
- Inlaid Rally Style Stripes
- Cobra Logo Etched On Top of Shift Knob
- Made Using Premium Partek Resins
- Engineered for Strength and Durability
- 2-1/8” Diameter and 12mm x 1.25 Thread Pattern
- Manufactured in the USA
- 2011-2017 Mustang V6
- 2015-2020 Mustang EcoBoost
- 2011-2020 Mustang GT
- 2012-2013 Mustang Boss 302
*This Shift Knob is NOT designed for use with 2011-2014 Shelby GT500’s or 2015-2020 Shelby GT350 and GT350R Mustangs.
These American-made manual shift knobs are made using the same high-quality partek resins found in billiard balls, and are engineered for long-term strength and durability. Choose from a variety of stripe and color combinations that suit your individual taste. Color options are listed by knob color, then stripe and logo color. The Cobra logo on the top of the knob is the same color as the stripes. All rally engravings are inlaid, polished smooth to the touch and guaranteed to last a life time.
For this specific shift knob, the Cobra logo divides the rally racing stripes which run vertically around the shift knob.
- This manual shift knob does not include a jam nut. However, a jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended instead of a jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer you run the risk of splitting the shift knob in half if you over tighten knob when it bottoms out on the shift handle.
- For 2015-2020 Mustangs, the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.
*All knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.
*Does NOT fit 2010-2014 GT500s, which have a 10mm x 1.25 thread pattern.