Rally 2-1/8" Shift Knob with a 6-Speed Shift Pattern and Ford Racing Logo for 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs, 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs, 2014, 2015 and 2016 Focus RSs and 2014, 2015, 2016, 2017, 2018 and 2019 Fiesta STs.
If you’re looking for a way to spruce up the interior of your 2014-2019 Fiesta ST, 2013-2018 Focus ST, 2011-2020 Mustangs, then you should add a rally-style 2-1/8” manual shift knob featuring a 6-speed pattern and Ford Racing logos from CJ Pony Parts!
Features and Benefits: - Available in a Wide Assortment of Colors - Dual Inlaid Rally-Style Stripes - Correct 6-Speed Shift Pattern (Reverse to the Left and Up) - Ford Racing Logo Etched On Each Side of Shift Knob - Made Using Premium Partek Resins - Engineered for Strength and Durability - 2-1/8” Diameter and 12mm x 1.25 Thread Pattern - Made in the USA
*All knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.
Vehicle Fitment: - 2011-2017 Mustang V6 - 2015-2020 Mustang EcoBoost - 2011-2020 Mustang GT - 2012-2013 Mustang Boss 302 - 2014-2019 Fiesta ST - 2013-2018 Focus ST - 2016-2018 Focus RS *This Shift Knob is NOT designed for use with 2011-2014 Shelby GT500’s or 2015-2020 Shelby GT350 and GT350R Mustangs.
These American-made manual shift knobs are manufactured using the same high-quality partek resins found in billiard balls, and are engineered for long-term strength and durability. Choose from a variety of stripe and color combinations that suit your individual taste. Color options are listed by knob color, then stripe color. The shift pattern and Ford Racing logos are the same color as the stripes and are inlaid, polished smooth to the touch.
Additional Notes: - The 2011-2014 Mustang requires a jam nut with these shift knobs. A jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended over the jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer you run the risk of splitting the shift knob if you over tighten the shift knob and it bottoms out on the shift handle. - For 2015-2020 Mustangs, 2014-2019 Fiesta STs, 2013-2018 Focus STs and 2016-2018 Focus RSs; the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.