Shift Knob 2-1/8" Rally With Shift Pattern 6-Speed Mustang 2011-2020/ Fiesta 2014-2019/ Focus ST 2013-2018

CJ's Part Number:
MSK247-V
Rating:
98% of 100
From
$54.99

Rally 2-1/8" Shift Knob with a Shift Pattern for 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs, 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs, 2014, 2015 and 2016 Focus RSs and 2014, 2015, 2016, 2017, 2018 and 2019 Fiesta STs.

Add a race inspired feel to the interior of your 2013-2018 Focus ST, 2014-2019 Fiesta ST or 2011-2020 6-Speed Mustang with this high-quality shift knob. These knobs are manufactured in America using the finest partek resins available and are engineered for strength and durability.

Available in multiple color options with the correct, original shift pattern and rally style stripes inlaid and polished smooth. Color options are listed by knob color, then stripe color. The shift pattern is the same color as the stripes.

Features and Benefits:
- Available in a Variety of Color Combinations
- Inlaid Rally Style Stripes
- Correct Shift Pattern
- Made Using High-Quality Partek Resins
- Engineered for Strength and Durability
- 2-1/8” Diameter
- 12mm x 1.25 Thread Pattern
- Made in the USA

Vehicle Fitment:
- 2011-2017 Mustang V6
- 2015-2020 Mustang EcoBoost
- 2011-2020 Mustang GT
- 2012-2013 Mustang Boss 302
- 2014-2019 Fiesta ST
- 2013-2018 Focus ST
- 2016-2018 Focus RS
*This Shift Knob is NOT designed for use with 2011-2014 Shelby GT500’s or 2015-2020 Shelby GT350 and GT350R Mustangs.

Additional Notes: 
- For the 2011-2014 Mustang a jam nut is required with these shift knobs. A jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended over the jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer, you run the risk of splitting the shift knob if you over tighten the shift knob and it bottoms out on the shift handle.
- For 2015-2020 Mustangs, 2014-2019 Fiesta STs, 2013-2018 Focus STs and 2016-2018 Focus RSs; the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.

*All shift knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.
*This shift knob will not fit 2010-2014 Shelby GT500 Mustangs because they require a 10mm x 1.25 thread pattern. 

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

If you're looking for any easy upgrade for the interior of your Mustang, you can't go wrong with an aftermarket shift knob. Here at CJ's we have a huge selection, including these 2 1/8" diameter USA made knobs, available in 13 colors. With or without stripes, with your choice of graphic, there's over a thousand different options available.

You should have no trouble finding one that looks great in your Mustang.

Installation for the shift knob is very easy. If you're early Mustang you'll have to thread on this jam nut. If you're '05 and up, we carry these retainers that will hold your boot in place once you install the after market knob.

All the knobs are available in solid colors, without any graphics whatsoever. If you chose to go with a graphic, we offer the 5.0, the running horse, the snake, the GT, as well as a Boss 302. If you choose to go with a pattern, stripes are available as well. And if you prefer, you can actually have the graphic added to the side.

In our case, we had this custom one made for our CJ race car with our CJ emblem on the side. We'll be installing this one.

Since quarter mile performance has been the goal with our gotta have it race 2013 GT, we're still running the stock shift knob. We'll remove this one and install our new green knob. Get a good grip on the knob and turn it counter clockwise.

First step for the installation of the new knob is to install its retainer. The retainer's gonna hold the boot in place and also work as a jam nut for the knob. Thread your retainer down until it's touching your shift boot. Grab your shift knob, line up the threads. Start threading it on. Now, if you thread it all the way down, it probably isn't gonna line up straight.

What you'll wanna do then is loosen it up until it's about an eighth of a turn from straight, thread the retainer upward. Get a good grip on it, turn it until it's straight. As you can see our shift knob was a nice additional upgrade to our interior. It only took a few minutes to install. You'll be back on the road in no time.

Vehicle Fitment

This product will fit the following Fiesta years:

This product will fit the following Focus years:

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.