Shift Knob 2-1/8" Solid Color Mustang 2005-2020/ Fiesta ST 2014-2019/ Focus 2013-2018

CJ's Part Number:
MSK231-V
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 4.7ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Solid Color 2-1/8" Shift Knob for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs, 2014, 2015, 2016, 2017, 2018 and 2019 Fiesta STs, 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs and 2016, 2017 and 2018 Focus RSs.

Bored with the stock shift knob in your 2013-2019 Focus, 2014-2019 Fiesta ST or 2005-2020 Mustang? Replace it with one of these custom 2-1/8" Solid Color Shift Knobs from CJ Pony Parts! With this shift knob, you have the ability to choose from a variety of color options to give your interior a little individual flair.

Features:
- Available in a Variety of Colors
- Manufactured Using Premium Partek Resins
- Engineered for Strength and Durability
- Comfortable 2-1/8" Knob Diameter
- 12mm x 1.25 Thread Pattern
- Made in the USA

These manual shift knobs are American made and are very similar to your typical billiard balls. The knobs are designed using the same high-quality partek resins and are manufactured for long-term strength and durability. These solid color shift knobs feature a popular 2-1/8" diameter for comfort in the palm of your hand and the correct 12mm x 1.25 thread pattern for a direct-fit in your Focus ST, Fiesta ST or 2005-2017 Mustang.

Vehicle Fitment:
- 2005-2017 Mustang V6
- 2015-2020 Mustang EcoBoost
- 2005-2020 Mustang GT
- 2012-2013 Mustang Boss 302
- 2007-2009 Shelby GT500
- 2014-2019 Fiesta ST
- 2013-2018 Focus ST
- 2016-2018 Focus RS
*This Shift Knob is NOT designed for use with 2010-2014 Shelby GT500’s or 2015-2020 Shelby GT350 and GT350R Mustangs.

Additional Notes: 
- This manual shift knob does not include a jam nut. However, a jam nut or threaded shift boot retainer is required for 2005-2014 Mustangs to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended over the jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer, you run the risk of splitting the shift knob in half if you over tighten the knob and it bottoms out on the shift handle.
- For 2015-2020 Mustangs, 2014-2019 Fiesta STs, 2013-2018 Focus STs and 2016-2018 Focus RSs; the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.

*All shift knobs are custom made to order and take approximately 3-4 weeks to ship from CJ Pony Parts.
*This shift knob will not fit 2010-2014 Shelby GT500 Mustangs because they require a 10mm x 1.25 thread pattern.

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Vehicle Fitment

This product will fit the following Fiesta years:

This product will fit the following Focus years:

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 6.7ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 6.75ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;