Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed 2015-2020
CJ's Part Number:
Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed 2015-2019 is rated out of 5 by 35.
Novice skill is required for this installation.
Rated 2 out of 5 by HarleyFrank from Painted Shift Pattern Not Aligned Properly Knob arrived promptly, packaged very well. But on inspection the painted shift pattern isn't aligned incorrectly. The '3' & '4' gears are placed closer to the '5' & '6' gears than the 'R' '1' & '2' gears are. Or, 'R' & the 1 & 2 gears are farther to the left in the painted-on pattern than 5 & 6. Make sense? Look at the illustration carefully. You can see it there. Not an evenly spaced shift pattern. The OEM knob has all the gears spaced the same. Not an accurate reproduction. For $85 it should be perfect. Not sure whether I'll send it back or use it.
Date published: 2015-05-18
Rated 5 out of 5 by Squid from Old school looks that fits the new school shifter Gives the interior that old school look. Simple installation, no adapter required. Great size (a bit bigger than stock) and doesn't get overly hot in summer heat.
Date published: 2015-09-01
Rated 5 out of 5 by Robbie_Frazier from Perfect Contrast to a Black Interior I installed this 50 Years shift knob the first weekend I had my new Mustang. I like the subtle 50 Years logo and the stark contrast of this knob against the all black ebony interior. It looks great, feels great, and was easy to install. Including a dry test fit before applying the thread locking fluid, the entire installation took less than three minutes (although it does require some time for the Loctite to cure before driving). As usual, CJPP goes above and beyond and includes a tube of Loctite in the package.
Date published: 2015-06-11
Rated 1 out of 5 by krizpy247 from Poor quality Bought this and got it in with the same defect I've seen mentioned. It has a G shaped 6 that is offset from the shift pattern and a large smudge accross the 2nd gear graphic.
Date published: 2015-12-31
Rated 5 out of 5 by Jess from Glitz!! I purchased the shift knob white with black shift pattern and it complements the interior, very pleased with it!!
Date published: 2015-04-24
Rated 5 out of 5 by Mstang821 from Sweeeeet I love this Shift Knob looks awesome and really stands out with the rest of my cars interior
Date published: 2015-04-04
Rated 5 out of 5 by Myblue 2015 from Solid shifts I have to say I got the shift knob for a little old school look inside the car. The difference in the diameter of the original and the 50 year knob was surprising. I don't have small hands and this shift knob gives me something a lot more meaty to throw my baby through the gears with. It's hollowed out in the bottom so it covers the reverse lift gate without a big bulky adapter and it looks bad with the console. I would diffidently recommend this shift knob.
Date published: 2015-04-18
Rated 5 out of 5 by Jobodizo from Great looking knob I ended up buying the white knob because the black was a little bit too glossy to look good inside the car and the white sets off a nice contrast with the ebony interior. I didn't have issues with the "6" that some are seeing. The knob itself was a nice quality "pool ball" material. No issues with install, 5 minutes or less and let the lock tire setup overnight. Wait for it to go back on sale to ~$60 before you buy.
Date published: 2016-12-26
Does the Knob gets hot when the car stays out during summer??
I live in Texas , and I will say that while it get warm, it is much cooler than the metal like insert on the top of the OEM knob. (and cooler than my steering wheel)
Date published: 2019-06-17
How easy is it to unscrew the shift knob (if I want a new knob or decide to revert to stock to sell the car) after applying the Loctite?
It depends on how much lock tight is used, use to much and it will be difficult to remove. I would start with a couple of drops and see how well it holds.
Date published: 2015-11-18
Is it available in colors (orange) with black print?
No, it's only available in black or white with the opposite color for print.
Date published: 2015-05-28
The painted gear numbers don't line up. That '6' gear number is dangling off the pattern, drooping down diagonally. The '4' gear number is lower than the '2'. The shift pattern lines are not aligned evenly. What gives?
I suspect the knob we used for photos was a prototype. If you look at the installed photos in our video and from other customers, you'll see that the numbers line up much better.
Date published: 2018-02-11
Complete Your Package