Skyjacker Steering Stabilizer Hydro 7000 HD OE-Style Jeep Wrangler JK 2007-2018

Skyjacker:
7003

Highlights

  • Sold Individually
  • Enhances Steering
  • Reduces Shimmy And Vibration
  • Includes Bushings And Boot
MSRP $62.94
$55.40
You save 12%

Skyjacker OE-Style HD Hydro 7000 Steering Stabilizer for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

This OE-Style HD Hydro 7000 Steering Stabilizer from Skyjacker is a direct fit replacement for your 2007-2018 Jeep JK Wrangler's factory steering stabilizer. It acts as a dampening shock for the steering system on your JK. When you modify your Wrangler with larger lift kits, or larger size wheels and tires, your factory steering stabilizer won't be able to hold up.

Features and Benefits of the Skyjacker OE-Style HD Hydro 7000 Steering Stabilizer (7003):
- Direct replacement
- Dampening shock for JK's steering system
- Improves stability
- Reduces vibration
- Includes bushings and red boot
- Straightforward installation
- Fits all 2007-2018 Jeep JK Wranglers

Skyjacker has been providing premium quality aftermarket suspension lift kits, leveling kits and shocks for nearly 40 years. With Skyjacker, you can reap the benefits of a suspension that performs well beyond your basic lift. Skyjacker knows what's important to you -- steering geometry, driveline angles, spring rates, suspension travel, flexibility, ride quality, comfort and performance.

Order Skyjacker's 7003 OE-Style HD Hydro 7000 Steering Stabilizer for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep Wrangler JK from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

When getting bigger tires and lifting your Jeep, the factory steering stabilizer isn't going to cut it. Today, we're going to be installing this Skyjacker Hydro 7000 Steering Stabilizer, fitting your 2007 to 2017 Jeep Wrangler. This steering stabilizer is going be a direct-fit replacement for the factory stabilizer and will dampen steering vibrations and shock to make your Jeep even more enjoyable and easier to control. It's a simple bolt-on installation and will give the front of our Jeep a nice custom touch, so today we're going to install it on our 2008 Jeep Wrangler.

Okay, we have the Jeep up in the air. We're going to remove the factory stabilizer. All you'll need is an 18 mm wrench. Loosen the first bolt and remove the factory nut. We have the nut off, but we can't remove this bolt just yet. Then, remove the nut down on this side. Pop the stabilizer off of its stud. Then, you're going to want to grab the stabilizer and kind of bend the bracket and the bolt should be able to come out along with the steering stabilizer. Okay, here's our Skyjacker Steering Stabilizer. It looks way better than the factory one. Now, I have to install the bushings onto the ends and push them in. Now, for the sleeves. Now, for the other one. With the bushings and sleeves in, we can now install the boot. You don't need anything to secure it up top, just get it over the lip, but then on the bottom here we're going to use the provided zip tie. Trim off the excess and it's now ready for installation. Reinstall it in the reverse order that you took the factory one out. Install the factory nuts and tighten them down, and our installation is finished.

All right. We got our Skyjacker Steering Stabilizer installed. It looks way better than the factory stabilizer and it'll make our Jeep a lot more enjoyable when we lift this and get bigger tires on it. Installation is super easy; you only need an 18 mm wrench and about 30 to 45 minutes. Before you know it, you'll be heading off road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.