Smittybilt Premium Soft Top With Tinted Windows 2-Door Jeep Wrangler JK 2010-2018

Smittybilt:
9076235

Highlights

  • 37Oz Multi-Layered, Material
  • 24% Thicker Than OE Specs
  • 40ml DOT Tinted Windows
  • Maximum UV Protection
MSRP $611.99
$530.99
You save 13%

Smittybilt Premium Soft Top with Tinted Windows for all 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 2-Door Jeep JK Wranglers.

If your original soft top is beginning to pull at the seams or you simply want a soft top for the summer Smittybilt has the top you’re looking for. This replacement Smittybilt 9076235 Premium Soft Top with Tinted Windows is the perfect solution for your 2010-2018 2-Door Jeep JK Wrangler’s need.

Features and Benefits:
- Made of ProT3k Trident structure
- 37oz multi-layered, wrinkle-free material that is 24% thicker than OE specs
- 40ml DOT-approved, Crystal clear, high definition, tinted vinyl windows
- Triple-layered for maximum noise reduction
- Exceptional cold-weather performance and ability to handle frigid temperatures
- Exceeds SAE J323B Standards of -22 degrees F
- Maximum UV protection
- Double layer stitching with highest quality, UV-protected and rot-resistant thread
- Large, maximum-strength zippers with self-correcting features in all weather
- Zippered pouch roof Pockets for extra storage
- Easy installation utilizes factory hardware

This multi-layered soft top is constructed of ProT3k Trident structure to be wrinkle-free and 24% thicker than OE specifications. For maximum noise reduction a triple layer construction is employed. Double layer stitching with the highest quality, rot and UV-resistant thread is utilized during the construction process to ensure a long life for your new soft top. To ensure your new soft top can be used year round, it is constructed to exceed SAE J323B cold weather standards of -22 degrees combined with top-of-the-line UV protection. This soft top is user friendly as it features large, self-correcting zippers and additional storage pockets. The easy installation process is completed using your original stock hardware to keep costs down on your new soft top.

The included tinted windows are the thickest in the industry. DOT-approved, these vinyl windows are crystal clear for an unobstructed view of the road or the trail.

Please Note: Fits 2-door Jeep Wrangler models only. Requires factory original hardware for installation.

Smittybilt proudly supplies thousands of active dealers and distributors worldwide with innovative truck and SUV accessories. Smittybilt has expanded its product offering to over 2,000 different products servicing the international truck and SUV markets. The constant involvement of management in the off-road markets has kept Smittybilt in touch with the latest market trends and on the forefront of engineering and design.

Order this Smittybilt 9076235 Premium Soft Top with Tinted Windows for your 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 2-Door Jeep JK Wrangler today from CJ Pony Parts.

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We're going to show you how to replace the soft top on your two-door JK Wrangler.

If the factory soft top on your JK has worn out over the years, and you're looking for an affordable option to replace it, today we're going to be installing this Smittybilt premium tinted window soft top fitting your 2010 to 2018 Jeep JK two-door Wrangler. This Smittybilt premium top is constructed of a 37-ounce multilayered wrinkle-free material that's over 24% thicker than the factory windows in your Jeep Wrangler. They feature 40-mil DOT-approved vinyl windows, and they're triple layered for maximum noise reduction. This top features maximum UV protection as well as a double layer of stitching around the edge of it, meaning it's going to be really durable over the years. This is much like a premium soft top option that you could have got from the factory but are very expensive if you choose a Mopar option. They feature a simple installation, which is going to reuse the factory soft top brackets and bows on your Jeep Wrangler, so with that being said, let's get started with the install.

The first step, obviously, in this installation is to get the factory or your old soft top off. As you can see, mine's been on here for six years. It's pretty outdated. It's a factory soft top. I figured it was time for a replacement. Now, you're going to want to do this above 70 degrees. We actually have the shop turned up to about 74. It's pretty warm in here, but this will allow the soft top material to be nice and easy to pull off. We're going to pull the zipper off, get started on this side. As you can see, the rear window has also seen better days. There's some pretty big scratches on here. Let's get this pulled off before we work on the rest of the top. You will need to reuse the tailgate bar, so simply slide that out of the factory rear window, and you'll be using this piece.

There are four screws in the back here on the rear bow. You're going to pull them off. Make sure you save them. You're going to be reinstalling them. Go ahead and fold your soft top back. It's going to allow you access to those front two screws. On both sides, there's going to be two screws right here on this header panel. Go ahead and pull them out. Make sure you save them. Repeat the same process on the other side.

The last step before we can remove your old soft top is to actually pull it all the way up and lock it into the header panel. You're going to flip it up over the hood, and the rest of that soft top will follow with it. Let's put it up now, and then we can access those screws on the header panel. You're going to have to remove this spring here. It does take a little bit of effort to do. We're going to get these off then keep moving on. After you get the spring removed, there's about 20 screws up here in the header panel. Get them all removed, and make sure you save them. You're going to be reusing all of them. Once you have all the screws removed, you can lay it over and remove the old top.

We went ahead and put some tape on the back side here. This is going to keep the inner edge stuck on there when we flip it around and reinstall all the screws. After you have the header bar exactly where you'd like, I actually use this throughout the entire time. It's going to keep track of where the screws came out of. I'm going to pull all of them out of the header and reinstall it. We're going to put these two screws on here. They actually attach to the cable that goes through the spring. Get them nice and tight before we flip it back over. Install this foam pad on top of those screws that you just tightened down. Just push firmly on it. This is going to keep a nice watertight seal. Repeat the same process on the other side.

The next step's going to be to put this spring back through this rubber isolator and then into the hook. Start up through the front here. You have to work with it a little bit to get it on. The next step's going to be to actually drill your screws back through this. You're going to roll it over the center bow and then drill a hole right in the center. It helps to actually sit in the back seat for this. The last four screws to put in are going to be in this rear bow. You actually have to wrap them around like this. Then find your hole, screw it in. The last step's going to be to install your windows. I like to start up top here, get this zipper started, just a little bit of a pull there. Get the front end of the door channel, and then pull your zipper on back. Your installation's complete.

We just wrapped up the installation of this Smittybilt premium soft top onto my 2012 Jeep JK. This top looks absolutely awesome. It's a premium material. Plus, the back windows are tinted, which is something that I'm not used to. It's a really cool feature to have. The install time is about two hours. You only need a Phillips-head screwdriver and maybe a pair of pliers. You can find this top as well as many other great parts for your JK right here at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart