Specialty Products Company Camber/Caster Sleeve 1-1/2 Degree 4WD F-250/F-350 1999-2004
Specialty Products Company 1-1/2 Degree Camber and Caster Sleeve for 1999, 2000, 2001, 2002, 2003 and 2004 4WD F-250s and F-350s.
If you need to adjust the camber, caster or both on your 1999-2004 F-150, then be sure to pick up this Specialty Products Company 1-1/2 Degree Camber and Caster Sleeve from CJ Pony Parts!
Features & Benefits:
- Change Camber, Caster or Both at the Same Time
- Remove Tire, Cotter Pin and Upper Ball Joint Stud Nut and Break Taper Free between Stud and Sleeve
- Use a Sleeve Puller, Remove Existing Sleeve and Install P/N 23139 to Determine Change Needed, Then Install Correct Sleeve
- To Adjust: Sleeve May be Lifted and Rotated 1/8-Turn
- Adjustment Range: Cam./Cas. ±1.5 Degree
- Installation Time: 1/2-Hour Per Side
- Sold Individually: One Required Per Wheel
This Specialty Products Company (23136) 1-1/2 Degree Camber and Caster Sleeve lets you adjust camber, caster or both at the same time on your Super Duty! Just use a sleeve puller and remove your existing sleeve and install P/N 23139 to determine that a 1-1/2 degree sleeve is what you need. From there, remove your tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and the sleeve. You can lift and rotate this sleeve 1/8-turn, and installation should take about a half-hour per side.
Order a Specialty Products Company (23136) 1-1/2 Degree Camber and Caster Sleeve for your 1999, 2000, 2001, 2002, 2003 or 2004 4WD F-250 or F-350 from CJ Pony Parts today!
California Residents: Proposition 65 Warning
This product will fit the following Super Duty years: