Specialty Products Company Camber/Caster Sleeve 1-1/2 Degree 4WD F-250/F-350 2005-2018
Specialty Products Company 1-1/2 Degree Camber and Caster Sleeve for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4WD F-250s and F-350s.
Change camber, caster or even both at the same time on your 2005-2018 4WD Super Duty F-250 or F-350 with this Specialty Products Company 1-1/2 Degree Camber and Caster Sleeve from CJ Pony Parts!
Features & Benefits:
- Change Camber, Caster or Both at the Same Time
- Remove Tire, Cotter Pin and Upper Ball Joint Stud Nut and Break Taper Free between Stud and Sleeve
- Use a Sleeve Puller, Remove Existing Sleeve and Install P/N 23139 to Determine Change Needed, Then Install Correct Sleeve
- To Adjust: Sleeve May be Lifted and Rotated 1/8-Turn
- Adjustment Range: Cam./Cas. ±1.5 Degree
- Installation Time: 1/2-Hour Per Side
- Sold Individually: One Required Per Wheel
This Specialty Products Company (23226) 1-1/2 Degree Camber and Caster Sleeve allows you to adjust camber, caster or both at the same time! Just use P/N 23139 to determine that this is the correct sleeve and then remove your tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and the sleeve. Installation will take you about a half-hour per side, and this sleeve is sold individually.
Order a Specialty Products Company (23226) 1-1/2 Degree Camber and Caster Sleeve for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 4WD F-250 or F-350 from CJ Pony Parts today!
California Residents: Proposition 65 Warning