Specialty Products Company Camber/Caster Sleeve 1-1/4 Degree 4WD F-250/F-350 1999-2004
Specialty Products Company 1-1/4 Degree Camber and Caster Sleeve for 1999, 2000, 2001, 2002, 2003 and 2004 4WD F-250s and F-350s.
If you’re looking for an easy way to adjust camber, caster or both on your 1999-2004 Super Duty F-250 or F-350, be sure to pick up this Specialty Products Company 1-1/4 Degree Camber and Caster Sleeve that’s now available from CJ Pony Parts!
Features & Benefits:
- Change Camber, Caster or Both at the Same Time
- Remove Tire, Cotter Pin and Upper Ball Joint Stud Nut and Break Taper Free between Stud and Sleeve
- Use a Sleeve Puller, Remove Existing Sleeve and Install P/N 23139 to Determine Change Needed, Then Install Correct Sleeve
- To Adjust: Sleeve May be Lifted and Rotated 1/8-Turn
- Adjustment Range: Cam./Cas. ±1.25 Degree
- Installation Time: 1/2-Hour Per Side
- Sold Individually: One Required Per Wheel
This Specialty Products Company (23135) 1-1/4 Degree Camber and Caster Sleeve allows you to change camber, caster or both at the same time! Be sure to install P/N 23139 first to determine the change you need, then install this sleeve. When you’re ready to install this 1-1/4 degree sleeve, just remove your tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and the sleeve. Installation should take you about a half hour on each wheel.
Order a Specialty Products Company (23135) 1-1/4 Degree Camber and Caster Sleeve for your 1999, 2000, 2001, 2002, 2003 or 2004 4WD F-250 or F-350 from CJ Pony Parts today!
California Residents: Proposition 65 Warning
This product will fit the following Super Duty years: