Specialty Products Company Camber/Caster Sleeve 1-1/4 Degree 4WD F-250/F-350 2005-2018
Specialty Products Company 1-1/4 Degree Camber and Caster Sleeve for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4WD F-250s and F-350s.
If you need a way to change camber, caster or both at the same time on your 2005-2018 4WD F-250 or F-350, you definitely need to pick up this Specialty Products Company 1-1/4 Degree Camber and Caster Sleeve that’s now available at CJ Pony Parts!
Features & Benefits:
- Change Camber, Caster or Both at the Same Time
- Remove Tire, Cotter Pin and Upper Ball Joint Stud Nut and Break Taper Free between Stud and Sleeve
- Use a Sleeve Puller, Remove Existing Sleeve and Install P/N 23139 to Determine Change Needed, Then Install Correct Sleeve
- To Adjust: Sleeve May be Lifted and Rotated 1/8-Turn
- Adjustment Range: Cam./Cas. ±1.25 Degree
- Installation Time: 1/2-Hour Per Side
- Sold Individually: One Required Per Wheel
This Specialty Products Company (23225) 1-1/4 Degree Camber and Caster Sleeve lets you change camber, caster or both at the same time. Just be sure to use P/N 23139 to ensure this sleeve is the correct size. After that, remove your tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and the sleeve. This camber and caster sleeve is sold individually and takes about 30 minutes per side to install.
Order a Specialty Products Company (23225) 1-1/4 Degree Camber and Caster Sleeve for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 4WD F-250 or F-350 from CJ Pony Parts today!
California Residents: Proposition 65 Warning