Specialty Products Company Camber/Caster Sleeve 1-3/4 Degree 4WD F-250/F-350 2005-2018
- Sold Individually
- Direct-Fit Replacement
- Quality Construction
- OEM Function
Specialty Products Company 1-3/4 Degree Camber and Caster Sleeve for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4WD F-250s and F-350s.
If you’re on the hunt for an easy way to change camber, caster or both at the same time on a 2005-2018 Super Duty 4WD F-250 or F-350, then be sure to pick up this Specialty Products Company 1-3/4 Degree Camber and Caster Sleeve from CJ Pony Parts!
Features & Benefits:
- Change Camber, Caster or Both at the Same Time
- Remove Tire, Cotter Pin and Upper Ball Joint Stud Nut and Break Taper Free between Stud and Sleeve
- Use a Sleeve Puller, Remove Existing Sleeve and Install P/N 23139 to Determine Change Needed, Then Install Correct Sleeve
- To Adjust: Sleeve May be Lifted and Rotated 1/8-Turn
- Adjustment Range: Cam./Cas. ±1.75 Degree
- Installation Time: 1/2-Hour Per Side
- Sold Individually: One Required Per Wheel
This Specialty Products Company (23227) 1-3/4 Degree Camber and Caster Sleeve lets you change camber, caster or both at the same time on your Super Duty! Just use P/N 23139 to ensure this is the right sleeve. Then remove your tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and the sleeve. This sleeve will take about 30 minutes to install and is sold individually.
Order a Specialty Products Company (23227) 1-3/4 Degree Camber and Caster Sleeve for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 4WD F-250 or F-350 from CJ Pony Parts today!
California Residents: Proposition 65 Warning