Specialty Products Company Camber/Caster Sleeve 1-Degree 4WD F-250/F-350 1999-2004
Specialty Products Company 1-Degree Camber and Caster Sleeve for 1999, 2000, 2001, 2002, 2003 and 2004 4WD F-250s and F-350s.
Looking for an easy way to adjust camber, caster or both at the same time on your 1999-2004 Super Duty F-250 or F-350? Then be sure to pick up this Specialty Products Company 1-Degree Caster and Camber Sleeve from CJ Pony Parts!
Features & Benefits:
- Change Camber, Caster or Both at the Same Time
- Remove Tire, Cotter Pin and Upper Ball Joint Stud Nut and Break Taper Free between Stud and Sleeve
- Use a Sleeve Puller, Remove Existing Sleeve and Install P/N 23139 to Determine Change Needed, Then Install Correct Sleeve
- To Adjust: Sleeve May be Lifted and Rotated 1/8-Turn
- Adjustment Range: Cam./Cas. ±1 Degree
- Installation Time: 1/2-Hour Per Side
- Sold Individually: One Required Per Wheel
This Specialty Products Company (23134) 1-Degree Camber and Caster Sleeve allows you to change camber, caster or both at the same time. Use a sleeve puller and remove the existing sleeve. Then install P/N 23139 to determine the change needed first and to ensure this 1-degree sleeve is what you need! Then remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and the sleeve. Installation should take you about 30 minutes per side.
Order a Specialty Products Company (23134) 1-Degree Camber and Caster Sleeve for your 1999, 2000, 2001, 2002, 2003 or 2004 4WD F-250 or F-350 from CJ Pony Parts today!
California Residents: Proposition 65 Warning
This product will fit the following Super Duty years: