Starkey Fog Light Kit V6 2013-2014/Boss 302 2013

Starkey: 3502
MSRP: $449.99
CJ's Low Price:
1508544000 15031
Earn 399 RPM Points What's this?
Starkey Fog Light Kit V6 2013-2014/Boss 302 2013
Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Play Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Video 1 Play Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Video 2

Product Description

Starkey Fog Light Kit for 2013-2014 V6 and 2013 Boss 302 Mustangs.

This kit includes EVERYTHING you need to equip your V6 or Boss 302 Mustang with fog lights. These fog lights are the same style used on the 2013-2014 Mustang V6 Pony Package and GT California Special.

The included OEM switch replaces your factory switch and gives your vehicle the Auto Headlamps feature if your car was not already equipped. Auto Headlamps use a sensor already installed in the car to automatically turn your head lights ON and OFF based on the light conditions outside (when enabled with switch). The fog lights won't shut off when the high beams are activated. No cutting or splicing is required.

-Fog lights and bulbs
-Fog light brackets
-Bezels for vehicles with fog lights
-OEM headlight/fog light switch with Auto Headlamps feature
-High quality wiring harness with relay and fuses
-Mounting hardware
-Detailed step-by-step installation manual

*This kit is specifically designed to fit any 2013-2014 Mustang that did not come from the factory with fog lamps.

Similar Mustang Parts

similar Mustang parts More Fog Lights  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Expensive But Great Addition To Your V6 Or Boss I ordered one of these fog light kits and had my mechanic install it as there is a lot of rerouting of wires and tapping into fuse boxes and so forth, plus I do not have a lift to get under my car to install the light assemblies. The parts are well made and the instructions are excellent. The parts are a combination of Ford and Starkey. There is also an instruction overview video to review that was well produced, and the tech rep I emailed with at Starkey was extremely helpful, so everything you need, parts and installation help, is all out there. The system, though, is pricey, although everything is nicely made. It also took my mechanic over two hours to install this system, so add that fee on top, too, and you are looking at a pretty high financial commitment to add these fog lights. When I took my Mustang home, I found that these lights were not projecting out very far at all. I took my car back to my mechanic, and we pulled the lower splash guard off (and its 17 bolts!), and we adjusted more the lights more upward to project out further. This was about 20 minutes, but the adjusting was easy. Bearing in mind that the first part of your Mustang that is seen at car shows is the front end, then adding these lights makes your Mustang look much better rather than those plain jane blank out plates, so you are getting a nice mod that makes your car look better, but is functional, too. Yes, I recommend this project, but you may have to smash your piggy bank to afford it!
Date published: 2016-02-04
Rated 5 out of 5 by from Quick installation I didn't install the kit - I had my body guy do it. But he raved about how easy it was. Glad to have the automatic headlights - that was an added bonus. It was foggy last night so I tried the lights out - perfect. :-)
Date published: 2017-01-03
  • y_2017, m_10, d_20, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_FGK2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 36.92ms

Product Questions

Will they fit on my 2013 GT with fog lights installed in the center grill?

Asked by: Robbie 27
Yes. There will be a few components that you will not need in this kit but it will work.
Answered by: CJPP Dave
Date published: 2017-01-27

Hi looked have no wiring for fog lights now as shown in the video !!! What do I do 

Asked by: JohnnyB58
This kit includes EVERYTHING you need to equip your V6 or Boss 302 Mustang with fog lights.
Answered by: rk cjpp
Date published: 2017-03-15

what is the procudure to install driving lites in my 2014 v6 mustang conv? any additional parts?

Asked by: sandi1937
An installation video is available on the product page - watch that for full detail on how this kit installs. It does come with everything you need.
Answered by: CJ Pony Parts
Date published: 2017-06-02
  • y_2017, m_10, d_20, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_FGK2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 37.74ms

You Might Also Like

Product Video

Starkey Fog Light Kit V6 2013-2014/Boss 302 2013 Video Transcript
By Bill Tumas: Today, we're going to be installing this California special style fog light conversion kit from Starkey Products. The kit includes everything you need for installation, your fog light assemblies, brackets, wiring, hardware, as well as detailed instructions. This kit is an excellent upgrade for your 2013 V6 or Boss 302 as well as any GT with an aftermarket grill, such as the Roush grill in our Gotta Have It Street car. The installation's going to require removal of these panels, so I have to have access under the bumper. Let's get started.

For this installation, you'll need a jack and jack stands or a lift, a quarter-inch ratchet, seven millimeter socket, eight millimeter socket, flat head screwdriver, small pick, wire strippers, electrical tape, and safety glasses.

One you're under the car, you want to remove the splash shield first. There are 17 screws that hold it in. Bumper cover doesn't have to be removed. Once we get the splash shield off, we'll do the access from underneath. The factory bezels are held in place by these five body colored tabs. We want to start at the top. The tabs you're going to have to pull them down slightly while putting some force on the bezel from the outside to remove them. This will a take a little bit of force to get off. Now we're going to install the fog light bezel. It's going to mount to the five body tabs that we just used. In addition, these four tabs here are going to get screws through them due to the additional weight of the fog lights. Make sure all five tabs are tight. Now we're going to install four screws in each of these corners. Make you do not over tighten these screws. Just get them snug.

Now we're ready to install the fog light itself. The bottom two holes line up with these two alignment pins are held in place by four screws. Put all the screws in loosely to hold it in place before you tighten anything down. You might find it easier to use a quarter-inch socket for some of the more difficult screws. Now we're ready to wire up our fog lights. You have to go the engine bay to remove this cover. Once you get the cover out of the way, we're going to modify the wiring harnesses. The cover's held in place by these push-pins. Simply pull up on the center and then remove the entire push-pin. Now that you've removed all eight tabs, you can pull the cover off and set it aside. These two wires here go down to your fog lights. You want to tap into the wires closer to the fog light plug to make sure you have enough extension. By the way, the wires are held on the pinch by these metal tabs. Just pop the tabs off, you should be able to fish the wire. You might have two tabs on there, and then you can pull the harness up through.

The factory plus is going to have four wires going to them. We're only going to need two for our fog light. Starkey provides us with wire taps. What you'll do is just pull back the insulation. You want to separate out your wires. The only two wires you need are the black and green and the tan and yellow here. Both all black wires are not used. You're going to carefully strip a small section for the wire tap. Slide the tap right over the bare wire and clamp it down. Now you want to grab the supplied fog light harness and plug it into your taps. It doesn't matter which end plugs in here. Make sure they're nice and tight. We're going to put electrical tape around them just to insulate them a little bit. I'm just going to drop the harness right back into the bottom here. Then, we'll go under the car to plug it in.

Once you finish the wiring you put your radiator cover back on. Now you want to finish your harness over the side of this radiator shroud here. Bring it down, then you can plug in your light. The plug's only going to fit one way. You'll probably have some excess slack. You want to zip tie it safely out of the way. Once you've safely tied all the wires out of the way, you're ready to reinstall our splash shield. Now we're going to test our lights. There's no power going to your fog light harness unless your ignition switch is turned forward, so you want to do that first. First, we'll check them with our parking lights, and now we'll check them with our headlights as well.

The installation of our driving lights is a nice addition to the front of our car. Installation should take you roughly about two hours. You'll be back on the road in no time.