Steeda Ball Joint X11 Pair 2011-2014
- Reduces Understeer
- Reduces Body Roll
- Exceeds O.E. Strength
- Requires 18" Wheels
Pair of Steeda X11 Ball Joints for 2010 GT500 Mustangs and All 2011, 2012, 2013 and 2014 Mustangs.
Steeda's X11 balljoints are a longer, stronger ball joint designed to raise the front roll center of your Mustang which becomes lower as a result of lowering the vehicle with springs or an adjustable ride height system.
Raising the roll center eliminates the issues associated with the lower roll center which include reduced cornering grip, increased body roll and increased understeer.
Our X11 ball joint will improve handling by reducing body roll and improving the front tire contact patch without increasing spring rate or roll bar rate. You will experience improved steering response and higher overall front cornering grip with reduced understeer as a result.
Steeda balljoints are made in the USA from high strength steel and case hardened to meet and exceed OEM strength and durability standards. All internal housing parts are made from low-friction Nylon to preserve factory steering feel and feedback. Strength testing showed tensile strength to be nearly four times as strong as the OE ball joint.
Designed to fit 2010 GT500, and all 2011 and up Mustang models. These ball joints come with all necessary hardware and are greasable unlike the OE ball joint.
- Raises front roll center for improved handling
- Reduces body roll
- Reduces understeer
- Exceeds O.E. ball joint strength and durability
*18" wheels are required for clearance.
*When using the ball joint, which relocates the outer control arm pivot point, a bump steer kit must be used because the relocation changes the geometry between the control arm and the tie rod ends which increases bump steer.
Order this Pair of Steeda X11 Ball Joints for your 2010 GT500 Mustangs or your 2011, 2012, 2013 or 2014 Mustang from CJ Pony Parts today!