Steeda Ball Joint X5 Pair 2005-2010
- Restores Front End Geometry
- Improved Front End Grip
- Improved Steering Response
- Made In The USA
Pair of Steeda X5 Ball Joints for all 2005, 2006, 2007, 2008, 2009 and 2010 Mustangs.
When you have lowering springs or any variety of suspension kits that drops your Mustang’s ride height and roll center, you’ll experience increased body roll and decreased tire contact patch area. This pair of Steeda X5 Ball Joints for all 2005, 2006, 2007, 2008, 2009 and 2010 Mustangs will raise the roll center of your vehicle to improve handling and overall control while drastically reducing body roll experienced.
These Steeda ball joints are made in the USA by a respected name-brand supplier to Ford. Their products have been rigorously tested and proven they have trusted durability that exceeds current production level ball joints. This pair of X5 Ball Joints meet Ford's standards for friction, wear, and durability, so you know you are getting a high quality part that gets you the results you need.
If your ball joints are making noise, feel a little too loose or you feel unsafe, replace them today with a pair of Steeda X5 Ball Joints for all 2005, 2006, 2007, 2008, 2009 and 2010 Mustangs from CJ Pony Parts. You’ll see and feel a significant improvement in handling with decreased body roll and improved front tire contact patch area, without increasing the spring rate or the roll bar rate.
Please Note: Steeda's X5 ball joints change the bump steer geometry, so it is highly recommended to use a bump steer kit in conjunction with these X5 ball joints.
*A minimum of 18" wheels are required for proper clearance.
Order this Pair of Steeda X5 Ball Joints for your 2005, 2006, 2007, 2008, 2009 or 2010 Mustang from CJ Pony Parts today!