Steeda Panhard Bar Adjustable With Polyurethane Bushings 2005-2014

100% of 100


  • Adjustable Length
  • Polyurethane Bushings
  • 4Lbs Lighter Than Factory Bar
  • Tubular4130 Chrome-Moly
MSRP $199.99
You save $0.04

Steeda Adjustable Panhard Bar with Polyurethane Bushings for all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs.

A great step towards improved handling out back is to ditch the factory panhard bar for Steeda's tubular adjustable panhard bar. Steeda uses 4130 chrome-moly steel for increased strength over the factory unit. Although the panhard bar is extremely strong and durable, it is 40% lighter than the factory panhard bar and 30% lighter than competitor's panhard bars.

Steeda's 2005-2014 Mustang Adjustable Panhard Bar is a great way to improve handling over the factory supplied non-adjustable panhard bar. Adjustment is made with a CNC machined chrome-moly steel adjuster. The adjustable length allows you to adjust the rear end offset. This is important if you run wider wheels and tires and want to make sure they are equal distance from the quarter panels on either side. Polyurethane bushings are used to reduce flex which will improve the panhard bar's control over handling. The bushings are larger than the stock bushings for durability, precise handling and no increase in noise, vibration and harshness. Polyurethane is a great choice when looking to increase performance without increasing NVH.

Steeda Adjustable Panhard Bar Features and Benefits:
- Tubular 4130 chrome-moly steel construction
- 4lbs lighter than factory panhard bar
- Street friendly polyurethane bushings
- Adjustable length allows adjustment of rear end offset
- Competition tested and proven

When lowering your Mustang, it's a good idea to install an adjustable panhard bar so you can center the rear axle under your car. With Steeda's panhard bar, you won't need to worry about a rough ride after installation due to street friendly polyurethane bushings. Easily adjust the panhard bar if you ever change your Mustang's ride height.

As with all Steeda parts, this Adjustable Panhard Bar with Polyurethane Bushings has been tested and proven in competition. With the addition of this panhard bar, your 2005-2014 will be one step closer to carving corners like a champ.

California Residents: Proposition 65 Warning

Installation Difficulty


Intermediate skill is required for this installation.

Installation Videos

Video Transcript

We’re here with a Steeda adjustable panhard bar fitting your 2005 through 2014 Mustang. If you lower your 2005 to 2014 Mustang, the suspension's going to naturally offset to the side. To get that adjustment right and get your rear centered, you'll need an adjustable panhard bar like this one here from Steeda. This is made of 4130 chrome-molly, which makes it 4 pounds lighter than your factory bar. More importantly, it is fully adjustable, allowing you to dial in your suspension and get your rear centered again. This features polyurethane bushings on both ends of the bar, and is going to install using your original hardware. If you're looking to lower your 2005 to 2014 Mustang, you want to make sure you pick up an adjustable panhard bar like this Steeda piece as well.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.