Steeda Rear Lower Control Arm Bearing Kit Spherical With Tool 2015-2020

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 117.6ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Reduces Wheel Hop
  • Teflon Lined Bearings
  • Removes Bind In Suspension
  • More Predictable Handling
MSRP $224.95
You save 27%

Steeda Spherical Rear Lower Control Arm Bearing Kit with a Tool for all 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs.

Improve your 2015-2020 Mustang's chassis responsiveness and handling with Steeda's all new Spherical Rear Lower Control Arm Bearing Kit from CJ Pony Parts! The soft rubber bushings straight from factory are not exactly ideal for putting all of your S550 Mustang's power to the ground. Upon heavy acceleration the standard bushings deflect causing many handling issues. Testing has shown that the factory bushings deflect so much that they can toe the rear tires inward over 2 degrees upon acceleration.

These Spherical Rear Lower Control Arm Bearings from Steeda eliminate the deflection from the factory bushings that can cause numerous negative handling affects. When drag racing, it is important to make sure you can hook up your tires, ridding your suspension of deflection and preventing to much negative toe on launch will ensure you are getting the traction you need upon hard acceleration to get off the line as quick as possible. Reduced wheel hop, increased chassis responsiveness, and understeer correction are also all major improvements to the performance of your S550 Mustang's suspension after installing this bearing kit.

Features and Benefits:
- Reduces amount of deflection
- Reduced wheel hop during hard acceleration
- No noise, vibration, harshness (NVH) increase
- Eliminates alignment change under power
- Decreases vehicle reaction times
- More predictable handling
- Removes bind in the suspension allowing it to move more freely
- Made from 1018-steel with a nickel plated finish to prevent corrosion
- Bearings are Teflon-lined for smooth operation
- Billet aluminum installation tool included
- Fits all 2015-2020 EcoBoost, V6 and GT Mustang

High precision Teflon-lining of the bearings allow for a smooth operation of your rear suspension and helps to prevent bind. This increases the bearings life and decreases the likelihood of having to replace them. Steeda constructs their Rear Lower Control Arm Spherical Bearings from 1018-steel and are nickel-plated to help protect against corrosion. These spherical bearings have been designed so they will not increase NVH, so your 2015-2020 Mustang can have improved suspension performance while maintaining the factory ride quality.

Most Mustang parts manufacturers are unable to cover your part needs on a bumper-to-bumper basis. Steeda is a Mustang parts manufacturer that offers everything you need for your vintage or newer Mustang model.

Installation Difficulty


Intermediate skill is required for this installation.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.93ms
  • bvseo-msg: HTTP status code of 404 was returned;

Is the rear subframe alignment kit necessary if these are installed?

Asked by: Eric V
Although not necessary they can be used together.
Answered by: rk cjpp
Date published: 2017-12-22

Steeda Rear Lower Control Arm Bearing Kit Spherical With Tool 2015-2017, How many sets of these you need? there are 2 on each side correct?

Asked by: SVOBullitt
You only need one set. One bearing gets installed in each side.
Answered by: CJPP Dave
Date published: 2018-10-15
  • y_2020, m_2, d_18, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_5554117, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 171.78ms