Steeda Rear Lower Control Arm Bearing Kit Spherical With Tool Mustang 2015-2021

Steeda:
555-4117

Highlights

  • Reduces Wheel Hop
  • Teflon Lined Bearings
  • Removes Bind In Suspension
  • More Predictable Handling
MSRP $224.95
$164.99
You save 27%

Steeda Spherical Rear Lower Control Arm Bearing Kit with a Tool for all 2015, 2016, 2017, 2018, 2019, 2020 and 2021 Mustangs.

Improve your 2015-2021 Mustang's chassis responsiveness and handling with Steeda's all new Spherical Rear Lower Control Arm Bearing Kit from CJ Pony Parts! The soft rubber bushings straight from factory are not exactly ideal for putting all of your S550 Mustang's power to the ground. Upon heavy acceleration the standard bushings deflect causing many handling issues. Testing has shown that the factory bushings deflect so much that they can toe the rear tires inward over 2 degrees upon acceleration.

These Spherical Rear Lower Control Arm Bearings from Steeda eliminate the deflection from the factory bushings that can cause numerous negative handling affects. When drag racing, it is important to make sure you can hook up your tires, ridding your suspension of deflection and preventing to much negative toe on launch will ensure you are getting the traction you need upon hard acceleration to get off the line as quick as possible. Reduced wheel hop, increased chassis responsiveness, and understeer correction are also all major improvements to the performance of your S550 Mustang's suspension after installing this bearing kit.

Features and Benefits:
- Reduces amount of deflection
- Reduced wheel hop during hard acceleration
- No noise, vibration, harshness (NVH) increase
- Eliminates alignment change under power
- Decreases vehicle reaction times
- More predictable handling
- Removes bind in the suspension allowing it to move more freely
- Made from 1018-steel with a nickel plated finish to prevent corrosion
- Bearings are Teflon-lined for smooth operation
- Billet aluminum installation tool included
- Fits all 2015-2020 EcoBoost, V6 and GT Mustang

High precision Teflon-lining of the bearings allow for a smooth operation of your rear suspension and helps to prevent bind. This increases the bearings life and decreases the likelihood of having to replace them. Steeda constructs their Rear Lower Control Arm Spherical Bearings from 1018-steel and are nickel-plated to help protect against corrosion. These spherical bearings have been designed so they will not increase NVH, so your 2015-2020 Mustang can have improved suspension performance while maintaining the factory ride quality.

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Installation Videos

Video Transcript

We’re here with a pair of spherical bearings fitting the real lower control arms of all 2015 through 2016 Mustangs from Steeda. Especially for drag racing, but even for road racing or general street use, these spherical bearings from Steeda are an excellent upgrade to help you put power to the ground on all 2015 through 2016 Mustangs. These spherical bearings are going to replace the factory rubber bushings found in your rear lower control arms of all 2015 through 2016 Mustangs. The factory rubber bushings have a lot of deflection and will create a lot of movement in the rear suspension, which then causes loss of traction and wheel hop. Spherical bearings are solid, so they're going to limit deflection and put a lot more power to the ground with no increase in noise or vibration. These spherical bearings will be direct replacements for the factory rubber bushings include installation tools and are sold as a pair.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.