Steering Column Flange Seal End Of Tube 1965-1967

CJ's Part Number:
SCS4
Steering Column Flange Seal End Of Tube 1965-1967 is rated 4.0 out of 5 by 4.
  • y_2019, m_9, d_18, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_SCS4, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 90.64ms
  • REVIEWS, PRODUCT

Highlights

  • OEM-Style Reproduction
  • High Quality Rubber
  • Seals Column To Firewall
  • Fits 1965-1967 Mustang
$14.99

Steering Column Flange Seal at the End of the Tube for 1965, 1966 and 1967 Mustangs.

This Steering Column Flange Seal fits between the lower steering column and the steering box. The purpose of the flange seal is to keep dirt and water out of the steering column and steering box. It is molded rubber to fit just like the original steering column flange seal. Trust CJ's to have all of the high-quality parts and hardware your classic pony's restoration project might need, and place your order now!

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has the parts you need to complete your classic Mustang restoration with ease! CJ’s has the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order this Steering Column Flange Seal for your 1965, 1966 or 1967 Mustang today from CJ Pony Parts!

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Perfect Fit! This popped on with no problems and fits very well. No use in using the original with these being made.
Date published: 2019-08-01
Rated 2 out of 5 by from Doesn't fit my '67 The inside diameter hole is 1.25" while my steering shaft is 0.75". The O.D. is correct at 1.375"
Date published: 2018-07-12
Rated 5 out of 5 by from Works great, fits great It worked a lot better than the crusty, hard donut that I took off the car.
Date published: 2018-02-28
Rated 4 out of 5 by from Great fit and function I would recommend this product, great fit and function.
Date published: 2015-03-31
  • y_2019, m_9, d_18, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_SCS4, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.85ms
  • REVIEWS, PRODUCT

Is this the grommet at the very opposite end of the steering column tube?

Asked by: Steve
Yes.
Answered by: rk cjpp
Date published: 2019-01-14

67 Mustang, manual steering with rag joint. Tech manual shows a 3C577 Insulator installed in the bottom of the steering column in the engine compartment. Steering shaft is 3/4" diameter and tube is approx 2" ID. Is this the correct part for this area?

Asked by: kendal57
This fits the long shaft column.
Answered by: rk cjpp
Date published: 2018-11-26

Would it work with a borgeson steering box and shaft?

Asked by: Elmo66
Yes it could.
Answered by: rk cjpp
Date published: 2018-06-21
  • y_2019, m_9, d_20, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_SCS4, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 107.71ms
  • QUESTIONS, PRODUCT