StopTech Front Rotors Sport 4-Lug Drilled/ Slotted With Sport Pads Kit Mustang 5.0L 1987-1993
- Zinc-Coated Rotors
- Drilled and Slotted
- Set of Brake Pads Included
- High-Performance Shims
StopTech 4-Lug Drilled and Slotted Select Sport Front Rotor Kit with Sport Pads for 1987, 1988, 1989, 1990, 1991, 1992 and 1993 5.0L Mustangs.
StopTech's 4-Lug Select Sport Front Rotor Kit (928.61044) offers improved performance and added bite for 1987-1993 5.0L Mustangs. The rotors come with a set of Sport brake pads to ensure full system restoration. Drilled and slotted brake rotors will enhance your Mustang's looks, while 100% shimmed brake pads eliminate noise and vibration.
If your rotors and brake pads aren't delivering the performance you expect, it's time to address why. Extreme heat can cause the resins in your brake pad to vaporize or 'out-gas.' The used friction material turns into a fine dust as the brake pad wears out. As a result, a boundary layer of heat, gas and dust accumulates between the pad and rotor surfaces, inhibiting performance.
Features and Benefits:
- Drilled and Slotted Rotors for Increased Bite
- Enhanced Looks and Improved Performance
- Zinc-Coated for Corrosion Protection
- Brake Pads with High-Performance Shims Attached
- 100% Positive Molded and 100% Scorched for Improved Bed-In
- Copper Free Friction Formulas
StopTech's products provide an excellent solution to this situation. You can count on the G11 metallurgy brake rotors to deliver improved performance, along with extended service life thanks to a high-quality construction and corrosion-resistant zinc coating. The brake rotors also feature machined non-friction surfaces and non-directional finishes.
The included Sport brake pads are equally impressive. OE-style gas slots and chamfers are designed to optimize braking performance, specifically in repeat stop scenarios. They have been formulated for lower rotor wear, and they provide a linear response, both hot and cold. Best of all, they're quiet and never grabby! The set of brake pads arrives to you installation-ready and complete with application-specific hardware for your convenience.
Tech Tip: StopTech rotors are a direct replacement for your factory OE front rotors. For best results, follow the "Brake Pad Bed-In" instructions included with every shipment. Brake caliper service or rebuild is recommended for vehicles with higher mileage.
Please Note: 1993 Cobras use Cobra specific rotors that have a taller rotor 'hat.' These rotors will work on a Cobra but wheel spacers are required if running the original 1993 Cobra wheels.
California Residents: Proposition 65 Warning