Strut Tower Brace Boss 302 Style Mustang V6/ GT 2010-2014/ Boss 302 2012-2013

CJ's Part Number:
STB12
Rating:
98% of 100

Highlights

  • Stiffens Up The Front End
  • Improves Handling
  • Silver Powder Coated Finish
  • Clears Boss 302 Intake
MSRP $180.25
$105.99
You save 41%

Boss 302 Style Strut Tower Brace for 2010, 2011, 2012, 2013 and 2014 V6 and GT Mustangs and 2012-2013 Boss 302 Mustangs.

Stiffen the front end of your 2010-2014 Mustang GT or V6 with an original style strut tower brace used on the 2012-2013 Boss 302. Straight from the factory, the 2012-2013 Boss 302 Mustang comes with this strut tower brace. The brace is a great upgrade for 2010-2014 V6 and GT Mustangs as well. If you are installing a Boss 302 intake manifold (M9424M50BR) on your 2011-2014 GT, this is the strut tower brace for you! The Boss 302 intake is very tall which means this strut tower brace will also clear the stock 2010-2014 GT, Bullitt and V6 intake manifolds as well as the factory 5.0L intake covers.

Features and Benefits:
- Stiffens chassis
- Improves handling
- Silver powder coated finish
- Clears Boss 302 intake manifold

Not only does the strut tower brace add performance, but it looks great under the hood. The strut tower brace is finished with a silver powder coat for a long lasting finish. Installation of the brace is very easy and only requires the removal of four strut mount nuts. You can have a new strut tower brace installed in a matter of minutes.

Please Note: Does NOT clear positive displacement superchargers.

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

When upgrading the suspension on their Mustangs, many people overlook chassis stiffening. You can buy the best suspension components money can buy, but if the chassis flexible, they're just not going to get the job done. One of the easiest ways to tighten up your chassis is with the use of a strut tower brace. Today we're going to install this Boss 302 strut tower brace from Ford Racing on a 2013 Gotta Have It Race car. The strut tower brace is going to install to your factory bolt on the top of your strut tower. Features a silver powder coated finish which will be nice and durable, and will fit both Mustang GT and V6. For this installation you're going to need a 3/8 ratchet, 3/8 torque wrench and a 13-mm socket.

Installation of the strut tower brace will be very easy. Simply remove the nuts on the inside of the strut mounts on both sides. Once we remove all four nuts, were going to put the strut tower brace into place. Notice an arrow pointing forward, you want to make sure that faces the front of the car when you install the brace. We're going to place it over the four studs from our stud mounts and reinstall the nuts. Just get them snug, because we are going to torque them down. Now were going to torque all the nuts to 26 ft. /lbs.

The strut tower brace is going to fit all 2010 and up GT's and the V6's. If you have a 20 and up 5 L and upgrading the Boss 302 intake, you want to make sure you get this brace as well, because your factory one is not going to clear. Installation is only going to take you a few minutes; you'll be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.